Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1439940

Re: [LEDE-DEV] DHCP via bridge in case of IPv4

From Aaron Z <aczlan+ledev@gmail.com>
Newsgroups linux.kernel
Subject Re: [LEDE-DEV] DHCP via bridge in case of IPv4
Date 2016-07-09 13:50 +0200
Message-ID <rSYVH-2rX-3@gated-at.bofh.it> (permalink)
References <rSVXP-tW-9@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


On Sat, Jul 9, 2016 at 4:37 AM, Alexey Brodkin
<Alexey.Brodkin@synopsys.com> wrote:
> Hello,
>
> I was playing with quite simple bridged setup on different boards with
> very recent kernels (4.6.3 as of this writing) and found one interesting
> behavior that I cannot yet understand and googling din't help here as well.
>
> My setup is pretty simple:
> -------------       ------------------       -------------------------
> | HOST      |       | "Dumb AP"      |       | Wireless client       |
> | with DHCP |<----->(eth0)     (wlan0)<----->| attempting to         |
> | server    |       |    \ br0 /     |       | get settings via DHCP |
> -------------       ------------------       -------------------------
>
> * HOST is my laptop with DHCP server that works for sure.
> * "Dumb AP" is a separate board (I tried ARM-based Wandboard and ARC-based
>   AXS10x boards but results are exactly the same) with wired (eth0) and wireless
>   (wlan0) network controllers bridged together (br0). That "br0" bridge flawlessly
>   gets its settings from DHCP server on host.
> * Wireless client could be either a smatrphone or another laptop etc but
>   what's important it should be configured to get network settings by DHCP as well.
>
> So what happens "br0" always gets network settings from DHCP server on HOST.
> That's fine. But wireless client only reliably gets settings from DHCP server
> if IPv6 is enabled on "Dumb AP" board. If IPv6 is disabled I may see that
> wireless client sends "DHCP Discover" then server replies with "DHCP Offer" but
> that offer never reaches wireless client.
Do you have WDS enabled? If not, DHCP has issues in that scenario:
https://wiki.openwrt.org/doc/howto/clientmode

Aaron Z

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

DHCP via bridge in case of IPv4 Alexey Brodkin <Alexey.Brodkin@synopsys.com> - 2016-07-09 10:40 +0200
  Re: [LEDE-DEV] DHCP via bridge in case of IPv4 Aaron Z <aczlan+ledev@gmail.com> - 2016-07-09 13:50 +0200
    Re: [LEDE-DEV] DHCP via bridge in case of IPv4 Alexey Brodkin <Alexey.Brodkin@synopsys.com> - 2016-07-09 14:10 +0200
      Re: [LEDE-DEV] DHCP via bridge in case of IPv4 Russell Senior <russell@personaltelco.net> - 2016-07-10 09:30 +0200
        Re: [LEDE-DEV] DHCP via bridge in case of IPv4 Alexey Brodkin <Alexey.Brodkin@synopsys.com> - 2016-07-11 08:20 +0200

csiph-web