Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1431214

Re: [PATCH 1/4] ARM: dts: vf610-twr: Enable display controller

Show key headers only | View raw

On 2016-06-24 12:44, Anthony Felice wrote:
> This adds nodes to enable tcon0 and dcu0 for the Vybrid Tower. These
> are used to drive the Vybrid Tower TWR-LCD-RGB display. Also, a node
> for the nec nl4827hc19-05b panel on the TWR-LCD-RGB display has been
> added.

So my pixel clock polarity changes which will be part of 4.7 work for
Tower? I could never actually test that since I don't have the display
here...
https://patchwork.kernel.org/patch/8874971/

This patch looks good to me:
Acked-by: Stefan Agner <stefan@agner.ch>

--
Stefan

> 
> Signed-off-by: Anthony Felice <tony.felice@timesys.com>
> ---
>  arch/arm/boot/dts/vf610-twr.dts | 48 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
> index cdc1007..ad1aff9 100644
> --- a/arch/arm/boot/dts/vf610-twr.dts
> +++ b/arch/arm/boot/dts/vf610-twr.dts
> @@ -66,6 +66,10 @@
>  		clock-frequency = <50000000>;
>  	};
>  
> +	panel: panel {
> +		compatible = "nec,nl4827hc19-05b";
> +	};
> +
>  	regulators {
>  		compatible = "simple-bus";
>  		#address-cells = <1>;
> @@ -134,6 +138,13 @@
>  				 <&clks VF610_CLK_ENET_EXT>;
>  };
>  
> +&dcu0 {
> +	fsl,panel = <&panel>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_dcu0>;
> +	status = "okay";
> +};
> +
>  &dspi0 {
>  	bus-num = <0>;
>  	pinctrl-names = "default";
> @@ -210,6 +221,39 @@
>  
>  &iomuxc {
>  	vf610-twr {
> +		pinctrl_dcu0: dcu0grp {
> +			fsl,pins = <
> +				VF610_PAD_PTE0__DCU0_HSYNC	0x42
> +				VF610_PAD_PTE1__DCU0_VSYNC	0x42
> +				VF610_PAD_PTE2__DCU0_PCLK	0x42
> +				VF610_PAD_PTE4__DCU0_DE		0x42
> +				VF610_PAD_PTE5__DCU0_R0		0x42
> +				VF610_PAD_PTE6__DCU0_R1		0x42
> +				VF610_PAD_PTE7__DCU0_R2		0x42
> +				VF610_PAD_PTE8__DCU0_R3		0x42
> +				VF610_PAD_PTE9__DCU0_R4		0x42
> +				VF610_PAD_PTE10__DCU0_R5	0x42
> +				VF610_PAD_PTE11__DCU0_R6	0x42
> +				VF610_PAD_PTE12__DCU0_R7	0x42
> +				VF610_PAD_PTE13__DCU0_G0	0x42
> +				VF610_PAD_PTE14__DCU0_G1	0x42
> +				VF610_PAD_PTE15__DCU0_G2	0x42
> +				VF610_PAD_PTE16__DCU0_G3	0x42
> +				VF610_PAD_PTE17__DCU0_G4	0x42
> +				VF610_PAD_PTE18__DCU0_G5	0x42
> +				VF610_PAD_PTE19__DCU0_G6	0x42
> +				VF610_PAD_PTE20__DCU0_G7	0x42
> +				VF610_PAD_PTE21__DCU0_B0	0x42
> +				VF610_PAD_PTE22__DCU0_B1	0x42
> +				VF610_PAD_PTE23__DCU0_B2	0x42
> +				VF610_PAD_PTE24__DCU0_B3	0x42
> +				VF610_PAD_PTE25__DCU0_B4	0x42
> +				VF610_PAD_PTE26__DCU0_B5	0x42
> +				VF610_PAD_PTE27__DCU0_B6	0x42
> +				VF610_PAD_PTE28__DCU0_B7	0x42
> +			>;
> +		};
> +
>  		pinctrl_adc0_ad5: adc0ad5grp {
>  			fsl,pins = <
>  				VF610_PAD_PTC30__ADC0_SE5		0xa1
> @@ -370,6 +414,10 @@
>  	status = "okay";
>  };
>  
> +&tcon0 {
> +	status = "okay";
> +};
> +
>  &uart1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_uart1>;

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH 0/4] Enable display and touchscreen for Vybrid Tower Anthony Felice <tony.felice@timesys.com> - 2016-06-24 21:50 +0200
  [PATCH 1/4] ARM: dts: vf610-twr: Enable display controller Anthony Felice <tony.felice@timesys.com> - 2016-06-24 21:50 +0200
    Re: [PATCH 1/4] ARM: dts: vf610-twr: Enable display controller Stefan Agner <stefan@agner.ch> - 2016-06-25 23:00 +0200
  [PATCH 4/4] ARM: imx_v6_v7_defconfig: enable useful configurations for Vybrid Anthony Felice <tony.felice@timesys.com> - 2016-06-24 21:50 +0200
  [PATCH 3/4] ARM: dts: vf610-twr: Add crtouch node and pinmux Anthony Felice <tony.felice@timesys.com> - 2016-06-24 21:50 +0200

csiph-web