[PATCH net-next 07/19] net: hns: select Hilink before serdes loopback for HNS V2

Path	csiph.com!news.mixmin.net!aioe.org!bofh.it!news.nic.it!robomod
From	Yisen Zhuang <Yisen.Zhuang@huawei.com>
Newsgroups	linux.kernel
Subject	[PATCH net-next 07/19] net: hns: select Hilink before serdes loopback for HNS V2
Date	Tue, 21 Jun 2016 05:40:01 +0200
Message-ID	<rMkHD-l2-3@gated-at.bofh.it> (permalink)
References	<rMkHD-l2-5@gated-at.bofh.it>
X-Mailer	git-send-email 1.9.1
MIME-Version	1.0
Content-Type	text/plain
X-Originating-IP	[10.67.212.75]
X-Cfilter-Loop	Reflected
X-Mirapoint-Virus-Rapid-Raw	score=unknown(0), refid=str=0001.0A090204.5768B6A6.00AC,ss=1,re=0.000,recu=0.000,reip=0.000,cl=1,cld=1,fgs=0, ip=0.0.0.0, so=2013-06-18 04:22:30, dmn=2013-03-21 17:37:32
X-Mirapoint-Loop-ID	c25c8fcf943e02046b2b70302a7cf4bd
Sender	robomod@news.nic.it
List-ID	<linux-kernel.vger.kernel.org>
X-Mailing-List	linux-kernel@vger.kernel.org
Approved	robomod@news.nic.it
Lines	62
Organization	linux.* mail to news gateway
X-Original-Cc	<liguozhu@huawei.com>, <huangdaode@hisilicon.com>, <arnd@arndb.de>, <andriy.shevchenko@linux.intel.com>, <andrew@lunn.ch>, <geliangtang@163.com>, <ivecera@redhat.com>, <fengguang.wu@intel.com>, <charles.chenxin@huawei.com>, <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linuxarm@huawei.com>
X-Original-Date	Tue, 21 Jun 2016 11:56:27 +0800
X-Original-Message-ID	<1466481399-70080-8-git-send-email-Yisen.Zhuang@huawei.com>
X-Original-References	<1466481399-70080-1-git-send-email-Yisen.Zhuang@huawei.com>
X-Original-Sender	linux-kernel-owner@vger.kernel.org
Xref	csiph.com linux.kernel:1427234

Show key headers only | View raw

From: Kejian Yan <yankejian@huawei.com>

As Hilink3 and Hilink4 use the same xge training and xge u adaptor for
HNSv2, it needs to select which Hilink to be set before relative serdes
being configed. The hilink_access_sel is the register to do that.

Signed-off-by: Kejian Yan <yankejian@huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c | 26 +++++++++++++++++-----
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
index 09e60d6..aff9d77 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
@@ -435,11 +435,6 @@ int hns_mac_get_sfp_prsnt(struct hns_mac_cb *mac_cb, int *sfp_prsnt)
  */
 static int hns_mac_config_sds_loopback(struct hns_mac_cb *mac_cb, bool en)
 {
-	/* port 0-3 hilink4 base is serdes_vaddr + 0x00280000
-	 * port 4-7 hilink3 base is serdes_vaddr + 0x00200000
-	 */
-	u8 *base_addr = (u8 *)mac_cb->serdes_vaddr +
-		       (mac_cb->mac_id <= 3 ? 0x00280000 : 0x00200000);
 	const u8 lane_id[] = {
 		0,	/* mac 0 -> lane 0 */
 		1,	/* mac 1 -> lane 1 */
@@ -465,11 +460,30 @@ static int hns_mac_config_sds_loopback(struct hns_mac_cb *mac_cb, bool en)
 	}
 
 	if (mac_cb->serdes_ctrl) {
-		u32 origin = dsaf_read_syscon(mac_cb->serdes_ctrl, reg_offset);
+		u32 origin;
+
+		if (!AE_IS_VER1(mac_cb->dsaf_dev->dsaf_ver)) {
+#define HILINK_ACCESS_SEL_CFG		0x40008
+			/* hilink4 & hilink3 use the same xge training and
+			 * xge u adaptor. There is a hilink access sel cfg
+			 * register to select which one to be configed
+			 */
+			if ((!HNS_DSAF_IS_DEBUG(mac_cb->dsaf_dev)) &&
+			    (mac_cb->mac_id <= 3))
+				dsaf_write_syscon(mac_cb->serdes_ctrl,
+						  HILINK_ACCESS_SEL_CFG, 0);
+			else
+				dsaf_write_syscon(mac_cb->serdes_ctrl,
+						  HILINK_ACCESS_SEL_CFG, 3);
+		}
+
+		origin = dsaf_read_syscon(mac_cb->serdes_ctrl, reg_offset);
 
 		dsaf_set_field(origin, 1ull << 10, 10, en);
 		dsaf_write_syscon(mac_cb->serdes_ctrl, reg_offset, origin);
 	} else {
+		u8 *base_addr = (u8 *)mac_cb->serdes_vaddr +
+				(mac_cb->mac_id <= 3 ? 0x00280000 : 0x00200000);
 		dsaf_set_reg_field(base_addr, reg_offset, 1ull << 10, 10, en);
 	}
 
-- 
1.9.1

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH net-next 07/19] net: hns: select Hilink before serdes loopback for HNS V2 Yisen Zhuang <Yisen.Zhuang@huawei.com> - 2016-06-21 05:40 +0200

csiph-web