Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1428230
| From | Suman Anna <s-anna@ti.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH] ARM: AM33xx: PRM: Remove wrongly defined RSTST offset for PER Domain |
| Date | 2016-06-22 00:30 +0200 |
| Message-ID | <rMClb-3lP-19@gated-at.bofh.it> (permalink) |
| References | <rMqWJ-4rb-5@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi Keerthy, On 06/21/2016 05:08 AM, Keerthy wrote: > As per the TRM: http://www.ti.com/lit/ug/spruh73m/spruh73m.pdf > offset 0x4 is reserved for PRM_PER. Hence removing the wrongly > defined address offset. Thanks for the patch. These macros are not used anywhere, so it should be safe to remove these. I have tested this patch with an off-tree PRUSS driver releasing the reset, it works as expected without throwing any issues. That said, the current omap_hwmod code assumes default rstst_offs and st_shift and tries to still write some value into the RSTCTRL register in am33xx_prm_deassert_hardreset(), but it didn't have any side-affects though on AM33xx. This is what affected the AM437x due to incorrect RSTST offset value. That behavior is independent of this patch though. Tested-by: Suman Anna <s-anna@ti.com> regards Suman > Signed-off-by: Keerthy <j-keerthy@ti.com> > --- > arch/arm/mach-omap2/prm33xx.h | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h > index 2bc4ec5..66302c6 100644 > --- a/arch/arm/mach-omap2/prm33xx.h > +++ b/arch/arm/mach-omap2/prm33xx.h > @@ -52,8 +52,6 @@ > /* PRM.PER_PRM register offsets */ > #define AM33XX_RM_PER_RSTCTRL_OFFSET 0x0000 > #define AM33XX_RM_PER_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0000) > -#define AM33XX_RM_PER_RSTST_OFFSET 0x0004 > -#define AM33XX_RM_PER_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0004) > #define AM33XX_PM_PER_PWRSTST_OFFSET 0x0008 > #define AM33XX_PM_PER_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0008) > #define AM33XX_PM_PER_PWRSTCTRL_OFFSET 0x000c >
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH] ARM: AM33xx: PRM: Remove wrongly defined RSTST offset for PER Domain Keerthy <j-keerthy@ti.com> - 2016-06-21 12:20 +0200
Re: [PATCH] ARM: AM33xx: PRM: Remove wrongly defined RSTST offset for PER Domain Suman Anna <s-anna@ti.com> - 2016-06-22 00:30 +0200
Re: [PATCH] ARM: AM33xx: PRM: Remove wrongly defined RSTST offset for PER Domain Keerthy <a0393675@ti.com> - 2016-06-22 07:30 +0200
Re: [PATCH] ARM: AM33xx: PRM: Remove wrongly defined RSTST offset for PER Domain Tony Lindgren <tony@atomide.com> - 2016-06-22 10:10 +0200
csiph-web