Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1425976

Re: [PATCH v3 4/7] max8903: adds requesting of gpios.

Show key headers only | View raw

On 17/06/2016 4:30 PM, Krzysztof Kozlowski wrote:
> On 06/17/2016 07:00 AM, Chris Lapa wrote:
>> From: Chris Lapa <chris@lapa.com.au>
>>
>> This change ensures all gpios are available for the driver to use.
>>
>> Signed-off-by: Chris Lapa <chris@lapa.com.au>
>> ---
>>  drivers/power/max8903_charger.c | 79 ++++++++++++++++++++++++++++++++++++-----
>>  1 file changed, 70 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/power/max8903_charger.c b/drivers/power/max8903_charger.c
>> index dbd911c4..c068efe 100644
>> --- a/drivers/power/max8903_charger.c
>> +++ b/drivers/power/max8903_charger.c
>> @@ -212,6 +212,16 @@ static int max8903_probe(struct platform_device *pdev)
>>
>>  	if (pdata->dc_valid) {
>>  		if (pdata->dok && gpio_is_valid(pdata->dok)) {
>> +			ret = devm_gpio_request(dev,
>> +						pdata->dok,
>
> No need to split these two arguments. They fit in 80 chars.
>
>> +						data->psy_desc.name);
>> +			if (ret) {
>> +				dev_err(dev,
>> +						"Failed GPIO request for dok: %d err %d\n",
>> +						pdata->dok, ret);
>
> Indentation here is wrong. These should be aligned to first argument (dev).
>
>> +				return -EINVAL;
>
> Return 'ret'.
>
> All these three comments apply also to code below.
>
> Anyway the probe function is getting bigger and more difficult to read.
> Consider factoring out some code to a separate function. For example all
> the GPIO handling stuff could be factored.
>
> Best regards,
> Krzysztof

Good idea, I've split the gpio setup code into a function named: 
max8903_setup_gpios()

Also fixed the other issues you mentioned above.

Thanks,
Chris

>
>> +			}
>> +
>>  			gpio = pdata->dok; /* PULL_UPed Interrupt */
>>  			ta_in = gpio_get_value(gpio) ? 0 : 1;
>>  		} else {
>> @@ -223,6 +233,16 @@ static int max8903_probe(struct platform_device *pdev)
>>
>>  	if (pdata->dcm) {
>>  		if (gpio_is_valid(pdata->dcm)) {
>> +			ret = devm_gpio_request(dev,
>> +						pdata->dcm,
>> +						data->psy_desc.name);
>> +			if (ret) {
>> +				dev_err(dev,
>> +						"Failed GPIO request for dcm: %d err %d\n",
>> +						pdata->dcm, ret);
>> +				return -EINVAL;
>> +			}
>> +
>>  			gpio = pdata->dcm; /* Output */
>>  			gpio_set_value(gpio, ta_in);
>>  		} else {
>> @@ -233,6 +253,16 @@ static int max8903_probe(struct platform_device *pdev)
>>
>>  	if (pdata->usb_valid) {
>>  		if (pdata->uok && gpio_is_valid(pdata->uok)) {
>> +			ret = devm_gpio_request(dev,
>> +						pdata->uok,
>> +						data->psy_desc.name);
>> +			if (ret) {
>> +				dev_err(dev,
>> +						"Failed GPIO request for uok: %d err %d\n",
>> +						pdata->uok, ret);
>> +				return -EINVAL;
>> +			}
>> +
>>  			gpio = pdata->uok;
>>  			usb_in = gpio_get_value(gpio) ? 0 : 1;
>>  		} else {
>> @@ -244,6 +274,16 @@ static int max8903_probe(struct platform_device *pdev)
>>
>>  	if (pdata->cen) {
>>  		if (gpio_is_valid(pdata->cen)) {
>> +			ret = devm_gpio_request(dev,
>> +						pdata->cen,
>> +						data->psy_desc.name);
>> +			if (ret) {
>> +				dev_err(dev,
>> +						"Failed GPIO request for cen: %d err %d\n",
>> +						pdata->cen, ret);
>> +				return -EINVAL;
>> +			}
>> +
>>  			gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1);
>>  		} else {
>>  			dev_err(dev, "Invalid pin: cen.\n");
>> @@ -252,23 +292,44 @@ static int max8903_probe(struct platform_device *pdev)
>>  	}
>>
>>  	if (pdata->chg) {
>> -		if (!gpio_is_valid(pdata->chg)) {
>> -			dev_err(dev, "Invalid pin: chg.\n");
>> -			return -EINVAL;
>> +		if (gpio_is_valid(pdata->chg)) {
>> +			ret = devm_gpio_request(dev,
>> +						pdata->chg,
>> +						data->psy_desc.name);
>> +			if (ret) {
>> +				dev_err(dev,
>> +						"Failed GPIO request for chg: %d err %d\n",
>> +						pdata->chg, ret);
>> +				return -EINVAL;
>> +			}
>>  		}
>>  	}
>>
>>  	if (pdata->flt) {
>> -		if (!gpio_is_valid(pdata->flt)) {
>> -			dev_err(dev, "Invalid pin: flt.\n");
>> -			return -EINVAL;
>> +		if (gpio_is_valid(pdata->flt)) {
>> +			ret = devm_gpio_request(dev,
>> +						pdata->flt,
>> +						data->psy_desc.name);
>> +			if (ret) {
>> +				dev_err(dev,
>> +						"Failed GPIO request for flt: %d err %d\n",
>> +						pdata->flt, ret);
>> +				return -EINVAL;
>> +			}
>>  		}
>>  	}
>>
>>  	if (pdata->usus) {
>> -		if (!gpio_is_valid(pdata->usus)) {
>> -			dev_err(dev, "Invalid pin: usus.\n");
>> -			return -EINVAL;
>> +		if (gpio_is_valid(pdata->usus)) {
>> +			ret = devm_gpio_request(dev,
>> +						pdata->usus,
>> +						data->psy_desc.name);
>> +			if (ret) {
>> +				dev_err(dev,
>> +						"Failed GPIO request for usus: %d err %d\n",
>> +						pdata->usus, ret);
>> +				return -EINVAL;
>> +			}
>>  		}
>>  	}
>>
>>
>

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v3 4/7] max8903: adds requesting of gpios. Chris Lapa <chris@lapa.com.au> - 2016-06-17 07:10 +0200
  Re: [PATCH v3 4/7] max8903: adds requesting of gpios. Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-06-17 08:40 +0200
    Re: [PATCH v3 4/7] max8903: adds requesting of gpios. Chris Lapa <chris@lapa.com.au> - 2016-06-19 16:00 +0200

csiph-web