Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1423719

Re: [PATCH v2 1/4] max8903: adds documentation for device tree bindings.

Show all headers | View raw

On 16/06/2016 4:35 PM, Krzysztof Kozlowski wrote:
> On 06/14/2016 03:54 AM, Chris Lapa wrote:
>> On 10/06/2016 11:51 PM, Krzysztof Kozlowski wrote:
>>> On 06/10/2016 02:32 PM, Chris Lapa wrote:
>>>> From: Chris Lapa <chris@lapa.com.au>
>>>>
>>>> Signed-off-by: Chris Lapa <chris@lapa.com.au>
>>>> ---
>>>>  .../devicetree/bindings/power/max8903-charger.txt  | 30
>>>> ++++++++++++++++++++++
>>>>  1 file changed, 30 insertions(+)
>>>>  create mode 100644
>>>> Documentation/devicetree/bindings/power/max8903-charger.txt
>>>
>>> You again skipped all of the maintainers. Your patch won't be applied.
>>> You need to send the patch to the appropriate person so he/she could
>>> apply it.
>>>
>>> From this patch:
>>> Rob Herring <robh+dt@kernel.org> (maintainer:OPEN FIRMWARE AND FLATTENED
>>> DEVICE TREE BINDINGS,commit_signer:9/19=47%)
>>> Mark Rutland <mark.rutland@arm.com> (maintainer:OPEN FIRMWARE AND
>>> FLATTENED DEVICE TREE BINDINGS)
>>>
>>> From power suppyy tree:
>>> Sebastian Reichel <sre@kernel.org> (maintainer:POWER SUPPLY
>>> CLASS/SUBSYSTEM and DRIVERS)
>>> Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> (maintainer:POWER SUPPLY
>>> CLASS/SUBSYSTEM and DRIVERS)
>>> David Woodhouse <dwmw2@infradead.org> (maintainer:POWER SUPPLY
>>> CLASS/SUBSYSTEM and DRIVERS)
>>>
>>>
>>>> diff --git
>>>> a/Documentation/devicetree/bindings/power/max8903-charger.txt
>>>> b/Documentation/devicetree/bindings/power/max8903-charger.txt
>>>> new file mode 100644
>>>> index 0000000..e0b5366
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/power/max8903-charger.txt
>>>> @@ -0,0 +1,30 @@
>>>> +Maxim Semiconductor MAX8903 Battery Charger bindings
>>>> +
>>>> +Required properties:
>>>> +- compatible: "maxim,max8903-charger" for MAX8903 Battery Charger
>>>> +- dc_valid: Specifies that the DC portion of the MAX8903 has been
>>>> connected up
>>>> +        and that dok-gpios should be specified
>>>
>>> You don't need the dc_valid nor the usb_valid.  If the dok-gpios are
>>> present - use DC power. If the uok-gpios - USB power.
>>>
>> I did think that as well, but I didn't want to break backwards
>> compatibility.
>
> What do you mean by backwards compatibility? The driver did not support
> DeviceTree before so it is not about DT compatibility. If you think
> about platform data then it is different: how you match DT into driver's
> structure is up to you.
Ah okay, I misunderstood you here. I thought you meant remove usb_valid 
and dc_valid from the platform data. However determining usb and dc 
validity from the gpios set in the DT does make more sense. I will do that!
>
>
>>
>>> If both or none: print error.
>> Its valid to have both connected.
>
> Ah, okay. Just an example.
>
>>
>>>
>>> BTW, It would be nice if send also the user of this bindings - DTS/DTSI.
>> I'm not sure I understand what you mean here?
The DTSI file used is almost identical to the copy I included in the 
bindings document. Other then some extra pinmux stuff.

Thanks,
Chris
>
> I mean I would like to see the DTS file which is using this device and
> these bindings. It is not necessary but it would be nice.
>
> Best regards,
> Krzysztof
>
>>
>>>
>>> Best regards,
>>> Krzysztof
>>>
>>>> +    - dok-gpios: Valid DC power has been detected
>>>> +- usb_valid: Specifies that the USB portion of the MAX8903 has been
>>>> connected up
>>>> +        and that uok-gpios should be specified
>>>> +    - uok-gpios: Valid USB power has been detected
>>>> +
>>>> +Optional properties:
>>>> +- cen-gpios: Charge enable pin
>>>> +- chg-gpios: Charger status pin
>>>> +- flt-gpios: Fault pin
>>>> +- dcm-gpios: Current limit mode setting (DC or USB)
>>>> +- usus-gpios: USB suspend pin
>>>> +
>>>> +
>>>> +Example:
>>>> +
>>>> +    max8903-charger {
>>>> +        compatible = "maxim,max8903-charger";
>>>> +        dok-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
>>>> +        flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
>>>> +        chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
>>>> +        cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
>>>> +        dc_valid;
>>>> +        status = "okay";
>>>> +    };
>>>>
>>>
>>
>>
>>
>

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: [PATCH v2 1/4] max8903: adds documentation for device tree  bindings. Chris Lapa <chris@lapa.com.au> - 2016-06-14 04:00 +0200
  Re: [PATCH v2 1/4] max8903: adds documentation for device tree  bindings. Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-06-16 08:40 +0200
    Re: [PATCH v2 1/4] max8903: adds documentation for device tree  bindings. Chris Lapa <chris@lapa.com.au> - 2016-06-16 08:50 +0200

csiph-web