Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1423816
| From | Heiko Stübner <heiko@sntech.de> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [v2 PATCH 1/4] Documentation: bindings: add dt doc for Rockchip USB Type-C PHY |
| Date | 2016-06-16 11:00 +0200 |
| Message-ID | <rKBjz-66n-1@gated-at.bofh.it> (permalink) |
| References | <rJwFk-4on-9@gated-at.bofh.it> <rKtvI-1f4-23@gated-at.bofh.it> <rKAnw-5uL-17@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Am Donnerstag, 16. Juni 2016, 16:49:42 schrieb Tomasz Figa: > On Thu, Jun 16, 2016 at 9:31 AM, Chris Zhong <zyw@rock-chips.com> wrote: > > Hi Heiko > > > > On 06/16/2016 06:11 AM, Heiko Stuebner wrote: > >> Am Montag, 13. Juni 2016, 17:39:46 schrieb Chris Zhong: > >>> This patch adds a binding that describes the Rockchip USB Type-C PHY > >>> for rk3399 > >>> > >>> Signed-off-by: Chris Zhong <zyw@rock-chips.com> > >>> > >>> --- > >>> > >>> Changes in v2: > >>> - add some registers description > >>> > >>> Changes in v1: > >>> - add extcon node description > >>> - move the registers in phy driver > >>> - remove the suffix of reset > >>> > >>> .../devicetree/bindings/phy/phy-rockchip-typec.txt | 77 > >>> > >>> ++++++++++++++++++++++ 1 file changed, 77 insertions(+) > >>> > >>> create mode 100644 > >>> > >>> Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt > >>> > >>> diff --git > >>> a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt > >>> b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt new file > >>> mode 100644 > >>> index 0000000..430920c > >>> --- /dev/null > >>> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt > >>> @@ -0,0 +1,77 @@ > >>> +* ROCKCHIP type-c PHY > >>> +--------------------- > >>> + > >>> +Required properties: > >>> + - compatible : should be "rockchip,rk3399-typec-phy0" or > >>> + "rockchip,rk3399-typec-phy1" > >>> + - reg: Address and length of the usb phy control register set > >>> + - rockchip,grf : phandle to the syscon managing the "general > >>> + register files" > >>> + - clocks : phandle + clock specifier for the phy clocks > >>> + - clock-names : string, clock name, must be "tcpdcore", "tcpdphy_ref"; > >>> + - resets : a list of phandle + reset specifier pairs > >>> + - reset-names : string reset name, must be: > >>> + "tcphy", "tcphy_pipe", "uphy_tcphy" > >>> + - #phy-cells : Must be 0. See ./phy-bindings.txt for details. > >>> + - extcon : extcon specifier for the Power Delivery > >>> + > >>> +Note, there are 2 type-c phys for RK3399, and they are almost > >>> identical, > >>> except +these registers(description below), every register node contains > >>> 3 sections: +offset, enable bit, write mask bit. > >>> + - rockchip,typec_conn_dir : the register of type-c connector > >>> direction, > >>> + for type-c phy0, it must be <0xe580 0 16>; > >>> + for type-c phy1, it must be <0xe58c 0 16>; > >> > >> I think I said this already, but these register-lists would be much > >> happier > >> being defined inside the driver - see how Frank managed this on his > >> usb2phy > >> please. > >> > >> Heiko > > > > Yes, I move them into driver in v1 patch, but Rob Herring and Guenter > > Roeck > > recommend to put them back to dts. > > These phy0 and phy1 are exactly the same, except these grf registers. > > I think having the registers in dts isn't a bad idea. It might be > actually even useful to bring up this PHY on new SoCs, if they happen > to have the same PHY, just different plumbing. > > But I suppose we don't need two separate compatible strings for phy0 > and phy1 anymore as Rob pointed, just one "rockchip,rk3399-typec-phy". That is true - so I guess I'm also ok with going that way. Though with the GRF-based interfaces being as volatile as they are between soc types, I just fear that this might not hold up on future socs. For example the usb2phy is used on rk3036, rk3228, rk3366, rk3368, rk3399 and the GRF-side differs a lot - even with some features not even supported. > After the above is fixed and underscores in property names are > replaced with dashes, feel free to add my Reviewed-by. I guess the clock and reset-names could also use dashes instead of underscores.
Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread
[v2 PATCH 1/4] Documentation: bindings: add dt doc for Rockchip USB Type-C PHY Chris Zhong <zyw@rock-chips.com> - 2016-06-13 11:50 +0200
Re: [v2 PATCH 1/4] Documentation: bindings: add dt doc for Rockchip USB Type-C PHY Rob Herring <robh@kernel.org> - 2016-06-15 01:00 +0200
Re: [v2 PATCH 1/4] Documentation: bindings: add dt doc for Rockchip USB Type-C PHY Heiko Stuebner <heiko@sntech.de> - 2016-06-16 00:20 +0200
Re: [v2 PATCH 1/4] Documentation: bindings: add dt doc for Rockchip USB Type-C PHY Chris Zhong <zyw@rock-chips.com> - 2016-06-16 02:40 +0200
Re: [v2 PATCH 1/4] Documentation: bindings: add dt doc for Rockchip USB Type-C PHY Tomasz Figa <tfiga@chromium.org> - 2016-06-16 10:00 +0200
Re: [v2 PATCH 1/4] Documentation: bindings: add dt doc for Rockchip USB Type-C PHY Heiko Stübner <heiko@sntech.de> - 2016-06-16 11:00 +0200
csiph-web