Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1420628
| From | "Zheng, Lv" <lv.zheng@intel.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | RE: acpi: broken suspend to RAM with v4.7-rc1 |
| Date | 2016-06-13 11:00 +0200 |
| Message-ID | <rJvT0-3Sn-5@gated-at.bofh.it> (permalink) |
| References | <rIBnH-1m9-5@gated-at.bofh.it> <rICa6-24v-23@gated-at.bofh.it> <rIOEh-1Yk-7@gated-at.bofh.it> <rIPK1-2AT-5@gated-at.bofh.it> <rJvT0-3Sn-7@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi, Andrey > From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi- > owner@vger.kernel.org] On Behalf Of Rafael J. Wysocki > Subject: Re: acpi: broken suspend to RAM with v4.7-rc1 > > On Saturday, June 11, 2016 01:49:22 PM Andrey Skvortsov wrote: > > On 10 Jun, Rafael J. Wysocki wrote: > > > On Friday, June 10, 2016 11:32:10 PM Andrey Skvortsov wrote: > > > > Hi, > > > > > > > > On my laptop (DELL Vostro 1500) in v4.7-rc1 is broken suspend to RAM. > > > > Laptop doesn't finish suspend to RAM process (disks are off, but > > > > WiFi and Power LEDs are still on). The only way to get it out of > > > > this state, is to turn the power off. > > > > > > > > I've bisected the issue to commit 66b1ed5aa8dd25 > > > > [ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support > > > > for acpi_hw_write()]. > > > > > > > > If I revert this commit in v4.7-rc1 (or v4.7-rc2), suspend to RAM > > > > is working again. > > > > > > > > The cause of this problem is that after this commit write to PM1A > > > > Control Block (16-bit register) is done using two 8-bit writes. > > > > If I force this write to be 16-bit, then all is working as before. > > > > > > > > To get it working 'access_width' for PM1A Control Block needs to > > > > be 2 (16-bit), but it's 1 (8-bit). [Lv Zheng] Could you send me the acpidump of the machine? > > > > > > > > The root of the problem seems to be not the commit > 66b1ed5aa8dd25 > > > > itself, but the ACPI tables in BIOS where wrong access_width > > > > comes from. I fixed problem in FACP table, put it in initrd to > > > > override FACP table from BIOS. This fixed the issue, suspend to > > > > RAM is working now again. > > > > > > > > But I'm not sure whether is this proper fix for this problem. > > > > Is there any place in the kernel, where such ACPI quirks are placed? [Lv Zheng] My question would be: Does Windows behave correctly for this table? However there is a real case showing that there are real tables need us to correctly support BitWidth/BitOffset. Here is the information for you to refer: http://permalink.gmane.org/gmane.linux.kernel.commits.head/313870 > > > > > > Well, if the commit in question caused a problem to happen for you, > > > it also might cause similar problems to happen elsewhere. > > > > > > It looks like we'll need to revert that commit. > > Hi, > > > > or maybe to reset access_width AnyAcc from FACP table only for PM1A > > control register or even for all registers? This will fix the issue too. > > That's a good idea actually. > > > diff --git a/drivers/acpi/acpica/tbfadt.c > > b/drivers/acpi/acpica/tbfadt.c index 6208069..a476e94 100644 > > --- a/drivers/acpi/acpica/tbfadt.c > > +++ b/drivers/acpi/acpica/tbfadt.c > > @@ -714,7 +714,14 @@ static void acpi_tb_setup_fadt_registers(void) > > } > > } > > } > > > > + /* > > + * Reset access_width in the GAS for PM1A control register to > > + * undefined value. Because in some cases this field contains > > + * wrong value. > > + */ > > + acpi_gbl_FADT.xpm1a_control_block.access_width = 0; > > OK, let's see what Bob and Lv think about that. [Lv Zheng] There is a commit in 4.7-rc2: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=7f9bef9d Have you tried if the problem still exists in 4.7-rc2? Thanks and best regards -Lv
Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread
RE: acpi: broken suspend to RAM with v4.7-rc1 "Zheng, Lv" <lv.zheng@intel.com> - 2016-06-13 11:00 +0200
Re: acpi: broken suspend to RAM with v4.7-rc1 Andrey Skvortsov <andrej.skvortzov@gmail.com> - 2016-06-13 12:10 +0200
Re: acpi: broken suspend to RAM with v4.7-rc1 "Rafael J. Wysocki" <rafael@kernel.org> - 2016-06-15 02:30 +0200
RE: acpi: broken suspend to RAM with v4.7-rc1 "Zheng, Lv" <lv.zheng@intel.com> - 2016-06-15 08:10 +0200
Re: acpi: broken suspend to RAM with v4.7-rc1 Andrey Skvortsov <andrej.skvortzov@gmail.com> - 2016-06-15 22:10 +0200
csiph-web