Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1419413
| From | Gregory CLEMENT <gregory.clement@free-electrons.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH 02/10] arm64: dts: marvell: Add xtal clock support for Armada 3700 |
| Date | 2016-06-10 15:30 +0200 |
| Message-ID | <rIuFA-55o-27@gated-at.bofh.it> (permalink) |
| References | <rIuFz-55o-5@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
The configuration of the clock depend of the gpio latch. This information
is stored in the gpio block registers. That's why the block is shared
using a syscon node.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 9e2efb882983..7c61e13a16f3 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -105,6 +105,18 @@
status = "disabled";
};
+ gpio1: gpio@13800 {
+ compatible = "marvell,mvebu-gpio-3700",
+ "syscon", "simple-mfd";
+ reg = <0x13800 0x500>;
+
+ xtalclk: xtal-clk {
+ compatible = "marvell,armada-3700-xtal-clock";
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+ };
+
usb3: usb@58000 {
compatible = "marvell,armada3700-xhci",
"generic-xhci";
--
2.5.0
Back to linux.kernel | Previous | Next | Find similar | Unroll thread
[PATCH 02/10] arm64: dts: marvell: Add xtal clock support for Armada 3700 Gregory CLEMENT <gregory.clement@free-electrons.com> - 2016-06-10 15:30 +0200
csiph-web