Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1416812

Re: [PATCH v2 01/15] dt-bindings: sunxi: Add CCU binding documentation

Show all headers | View raw

On Wed, Jun 8, 2016 at 4:41 AM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> Introduce a new binding with its documentation for the brand new clock
> sub-framework.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
>  Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/sunxi-ccu.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> new file mode 100644
> index 000000000000..2c66046a1342
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> @@ -0,0 +1,17 @@
> +Allwinner Clock Control Unit Binding
> +------------------------------------
> +
> +Required properties :
> +- compatible: must contain one of the following compatible:
> +               - "allwinner,sun8i-h3-ccu"
> +
> +- reg: Must contain the registers base address and length
> +- clocks: phandle to the oscillators feeding the SPI controller. Two are

SPI? copy paste error?

> +          needed:
> +  - "hosc": the high frequency oscillator (usually at 24MHz)
> +  - "losc": the low frequency oscillator (usually at 32kHz)
> +- clock-names: Must contain the clock names described just above
> +- #clock-cells : must contain 1
> +- #reset-cells : must contain 1
> +
> +Example:

No example? Maybe just remove this section then.

ChenYu

> --
> 2.8.3
>

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 00/15] clk: sunxi: introduce "modern" clock support Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-06-07 22:50 +0200
  [PATCH v2 02/15] clk: sunxi-ng: Add common infrastructure Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-06-07 22:50 +0200
    Re: [PATCH v2 02/15] clk: sunxi-ng: Add common infrastructure Jean-Francois Moine <moinejf@free.fr> - 2016-06-09 09:40 +0200
  [PATCH v2 14/15] clk: sunxi-ng: Add H3 clocks Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-06-07 22:50 +0200
    Re: [PATCH v2 14/15] clk: sunxi-ng: Add H3 clocks Jean-Francois Moine <moinejf@free.fr> - 2016-06-09 09:50 +0200
  [PATCH v2 13/15] clk: sunxi-ng: Add N-K-M-P factor clock Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-06-07 22:50 +0200
  [PATCH v2 06/15] clk: sunxi-ng: Add mux clock support Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-06-07 22:50 +0200
  [PATCH v2 01/15] dt-bindings: sunxi: Add CCU binding documentation Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-06-07 22:50 +0200
    Re: [PATCH v2 01/15] dt-bindings: sunxi: Add CCU binding documentation Chen-Yu Tsai <wens@csie.org> - 2016-06-08 03:40 +0200
  [PATCH v2 09/15] clk: sunxi-ng: Add M-P factor clock support Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-06-07 22:50 +0200
  [PATCH v2 07/15] clk: sunxi-ng: Add phase clock support Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-06-07 22:50 +0200
  [PATCH v2 12/15] clk: sunxi-ng: Add N-K-M Factor clock Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-06-07 22:50 +0200

csiph-web