Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1412918

[PATCH v2 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver

From Neil Armstrong <narmstrong@baylibre.com>
Newsgroups linux.kernel
Subject [PATCH v2 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver
Date 2016-06-03 10:40 +0200
Message-ID <rFSO5-PO-1@gated-at.bofh.it> (permalink)
Organization linux.* mail to news gateway

Show all headers | View raw


Adds support for the Amlogic Meson GXBB SoC Watchdog Timer.
It differs from the meson6/meson8b HW, so need for a separate driver.
The HW provides a divider capable of having a 1ms timebase thus simplifying
the counter update.
The restart call is not provided even if the HW is capable of triggering a
system reset immediately because of the PSCI firmare having such functionnality.
The watchdog is not expected to be running at boot time since there is a separate
system-level watchdog running from the SCPI co-processor, but this case would be
handle in a next driver update.

Changes since v1 at http://lkml.kernel.org/r/1464614948-28247-1-git-send-email-narmstrong@baylibre.com :
- Update default timeout to 30sec
- Add separate CONFIG_
- Remove unused defines & functions
- Fix indentation
- Check set_timeout max value
- Reorder includes alphabetically
- Switch to human identify string
- clk_disable_unprepare on probe failure or removal

Changes since RFC version at http://lkml.kernel.org/r/1464249112-13658-1-git-send-email-narmstrong@baylibre.com :
- Remove status callback, will re-introduce it later to managed the already-running use case
- Fix registers defines indentation
- Fix space between operators
- Make all callbacks static functions
- Fix bindings with missing clocks attribute
- Do not stop/start watchdog on a timeout setup
- Fix probe device configuration

Neil Armstrong (3):
  watchdog: Add Meson GXBB Watchdog Driver
  dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
  ARM64: dts: amlogic: meson-gxbb: Add watchdog node

 .../bindings/watchdog/meson-gxbb-wdt.txt           |  16 ++
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        |   6 +
 drivers/watchdog/Kconfig                           |  10 +
 drivers/watchdog/Makefile                          |   1 +
 drivers/watchdog/meson_gxbb_wdt.c                  | 268 +++++++++++++++++++++
 5 files changed, 301 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
 create mode 100644 drivers/watchdog/meson_gxbb_wdt.c

-- 
2.7.0

Back to linux.kernel | Previous | NextNext in thread | Find similar | Unroll thread


Thread

[PATCH v2 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver Neil Armstrong <narmstrong@baylibre.com> - 2016-06-03 10:40 +0200
  [PATCH v2 2/3] dt-bindings: watchdog: Add Meson GXBB Watchdog bindings Neil Armstrong <narmstrong@baylibre.com> - 2016-06-03 10:40 +0200
  [PATCH v2 3/3] ARM64: dts: amlogic: meson-gxbb: Add watchdog node Neil Armstrong <narmstrong@baylibre.com> - 2016-06-03 10:40 +0200
  [PATCH v2 1/3] watchdog: Add Meson GXBB Watchdog Driver Neil Armstrong <narmstrong@baylibre.com> - 2016-06-03 10:40 +0200
    Re: [PATCH v2 1/3] watchdog: Add Meson GXBB Watchdog Driver Guenter Roeck <linux@roeck-us.net> - 2016-06-04 20:00 +0200
      Re: [PATCH v2 1/3] watchdog: Add Meson GXBB Watchdog Driver Neil Armstrong <narmstrong@baylibre.com> - 2016-06-06 09:50 +0200
        Re: [PATCH v2 1/3] watchdog: Add Meson GXBB Watchdog Driver Guenter Roeck <linux@roeck-us.net> - 2016-06-07 17:40 +0200

csiph-web