Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1407596

Re: [PATCH v4 2/2] usb: host: ehci-tegra: Avoid getting the same reset twice

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

On Thu, May 26, 2016 at 05:23:30PM +0200, Thierry Reding wrote:
> From: Thierry Reding <treding@nvidia.com>
> 
> Starting with commit 0b52297f2288 ("reset: Add support for shared reset
> controls") there is a reference count for reset control assertions. The
> goal is to allow resets to be shared by multiple devices and an assert
> will take effect only when all instances have asserted the reset.
> 
> In order to preserve backwards-compatibility, all reset controls become
> exclusive by default. This is to ensure that reset_control_assert() can
> immediately assert in hardware.
> 
> However, this new behaviour triggers the following warning in the EHCI
> driver for Tegra:
> 
> [    3.365019] ------------[ cut here ]------------
> [    3.369639] WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x16c/0x23c
> [    3.382151] Modules linked in:
> [    3.385214] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc6-next-20160503 #140
> [    3.392769] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
> [    3.399046] [<c010fa50>] (unwind_backtrace) from [<c010b120>] (show_stack+0x10/0x14)
> [    3.406787] [<c010b120>] (show_stack) from [<c0347dcc>] (dump_stack+0x90/0xa4)
> [    3.414007] [<c0347dcc>] (dump_stack) from [<c011f4fc>] (__warn+0xe8/0x100)
> [    3.420964] [<c011f4fc>] (__warn) from [<c011f5c4>] (warn_slowpath_null+0x20/0x28)
> [    3.428525] [<c011f5c4>] (warn_slowpath_null) from [<c03cc8cc>] (__of_reset_control_get+0x16c/0x23c)
> [    3.437648] [<c03cc8cc>] (__of_reset_control_get) from [<c0526858>] (tegra_ehci_probe+0x394/0x518)
> [    3.446600] [<c0526858>] (tegra_ehci_probe) from [<c04516d8>] (platform_drv_probe+0x4c/0xb0)
> [    3.455029] [<c04516d8>] (platform_drv_probe) from [<c044fe78>] (driver_probe_device+0x1ec/0x330)
> [    3.463892] [<c044fe78>] (driver_probe_device) from [<c0450074>] (__driver_attach+0xb8/0xbc)
> [    3.472320] [<c0450074>] (__driver_attach) from [<c044e1ec>] (bus_for_each_dev+0x68/0x9c)
> [    3.480489] [<c044e1ec>] (bus_for_each_dev) from [<c044f338>] (bus_add_driver+0x1a0/0x218)
> [    3.488743] [<c044f338>] (bus_add_driver) from [<c0450768>] (driver_register+0x78/0xf8)
> [    3.496738] [<c0450768>] (driver_register) from [<c010178c>] (do_one_initcall+0x40/0x170)
> [    3.504909] [<c010178c>] (do_one_initcall) from [<c0c00ddc>] (kernel_init_freeable+0x158/0x1f8)
> [    3.513600] [<c0c00ddc>] (kernel_init_freeable) from [<c0810784>] (kernel_init+0x8/0x114)
> [    3.521770] [<c0810784>] (kernel_init) from [<c0107778>] (ret_from_fork+0x14/0x3c)
> [    3.529361] ---[ end trace 4bda87dbe4ecef8a ]---
> 
> The reason is that Tegra SoCs have three EHCI controllers, each with a
> separate reset line. However the first controller contains UTMI pads
> configuration registers that are shared with its siblings and that are
> reset as part of the first controller's reset. There is special code in
> the driver to assert and deassert this shared reset at probe time, and
> it does so irrespective of which controller is probed first to ensure
> that these shared registers are reset before any of the controllers are
> initialized. Unfortunately this means that if the first controller gets
> probed first, it will request its own reset line and will subsequently
> request the same reset line again (temporarily) to perform the reset.
> This used to work fine before the above-mentioned commit, but now
> triggers the new WARN.
> 
> Work around this by making sure we reuse the controller's reset if the
> controller happens to be the first controller.
> 
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
> Changes in v4:
> - avoid calling reset_control_put() on ERR_PTR()-encoded error codes
> 
> Changes in v3:
> - reword commit message to more accurately describe the hardware design
> 
> Changes in v2:
> - restore has_utmi_pad_registers condition (Alan Stern)
> 
>  drivers/usb/host/ehci-tegra.c | 16 +++++++++++++---
>  1 file changed, 13 insertions(+), 3 deletions(-)

Alan, Greg,

I forgot to mention, but it'd be great if this could go into v4.7
because the reset framework commit that triggers this was merged into
Linus' tree last week.

Thierry

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v4 1/2] usb: host: ehci-tegra: Grab the correct UTMI pads reset Thierry Reding <thierry.reding@gmail.com> - 2016-05-26 17:30 +0200
  Re: [PATCH v4 2/2] usb: host: ehci-tegra: Avoid getting the same  reset twice Thierry Reding <thierry.reding@gmail.com> - 2016-05-26 17:30 +0200
  [PATCH v4 2/2] usb: host: ehci-tegra: Avoid getting the same reset twice Thierry Reding <thierry.reding@gmail.com> - 2016-05-26 17:30 +0200

csiph-web