[PATCH 1/3] dt-bindings: Add binding docs for V3D.

From	Eric Anholt <eric@anholt.net>
Newsgroups	linux.kernel
Subject	[PATCH 1/3] dt-bindings: Add binding docs for V3D.
Date	2016-03-04 21:40 +0100
Message-ID	<r94FX-3Op-1@gated-at.bofh.it> (permalink)
References	<r94FX-3Op-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

This was missed in the upstreaming process.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
index 56a961a..9f97df4 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
+++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
@@ -35,6 +35,12 @@ Optional properties for HDMI:
 		  as an interrupt/status bit in the HDMI controller
 		  itself).  See bindings/pinctrl/brcm,bcm2835-gpio.txt
 
+Required properties for V3D:
+- compatible:	Should be "brcm,bcm2835-v3d"
+- reg:		Physical base address and length of the V3D's registers
+- interrupts:	The interrupt number
+		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+
 Example:
 pixelvalve@7e807000 {
 	compatible = "brcm,bcm2835-pixelvalve2";
@@ -60,6 +66,12 @@ hdmi: hdmi@7e902000 {
 	clock-names = "pixel", "hdmi";
 };
 
+v3d: v3d@7ec00000 {
+	compatible = "brcm,bcm2835-v3d";
+	reg = <0x7ec00000 0x1000>;
+	interrupts = <1 10>;
+};
+
 vc4: gpu {
 	compatible = "brcm,bcm2835-vc4";
 };
-- 
2.7.0

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH 1/3] dt-bindings: Add binding docs for V3D. Eric Anholt <eric@anholt.net> - 2016-03-04 21:40 +0100
  Re: [PATCH 1/3] dt-bindings: Add binding docs for V3D. Rob Herring <robh@kernel.org> - 2016-03-17 13:00 +0100

csiph-web