Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1349871

RE: [PATCH] net: fec: Rename "phy-reset-active-low" property

Show all headers | View raw

From: Bernhard Walle <bernhard@bwalle.de> Sent: Thursday, March 03, 2016 5:16 PM
> To: davem@davemloft.net
> Cc: arnd@arndb.de; netdev@vger.kernel.org; linux-kernel@vger.kernel.org;
> Bernhard Walle <bernhard@bwalle.de>
> Subject: [PATCH] net: fec: Rename "phy-reset-active-low" property
> 
> From the perspective of RESET, the meaning of the new property is actually
> "active high". Thanks for Troy Kisky for pointing that out.
> 
> Since the patch is in linux-next, this patch is incremental and doesn't replace
> the original patch.
> 
> Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
> ---
>  Documentation/devicetree/bindings/net/fsl-fec.txt | 2 +-
>  drivers/net/ethernet/freescale/fec_main.c         | 8 ++++----
>  2 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt
> b/Documentation/devicetree/bindings/net/fsl-fec.txt
> index a4799ff..b037a9d 100644
> --- a/Documentation/devicetree/bindings/net/fsl-fec.txt
> +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
> @@ -12,7 +12,7 @@ Optional properties:
>    only if property "phy-reset-gpios" is available.  Missing the property
>    will have the duration be 1 millisecond.  Numbers greater than 1000 are
>    invalid and 1 millisecond will be used instead.
> -- phy-reset-active-low : If present then the reset sequence using the GPIO
> +- phy-reset-active-high : If present then the reset sequence using the
> +GPIO
>    specified in the "phy-reset-gpios" property is reversed (H=reset state,
>    L=operation state).
>  - phy-supply : regulator that powers the Ethernet PHY.
> diff --git a/drivers/net/ethernet/freescale/fec_main.c
> b/drivers/net/ethernet/freescale/fec_main.c
> index bad0ba2..37c0815 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -3191,7 +3191,7 @@ static int fec_enet_init(struct net_device *ndev)
> static void fec_reset_phy(struct platform_device *pdev)  {
>  	int err, phy_reset;
> -	bool active_low = false;
> +	bool active_high = false;
>  	int msec = 1;
>  	struct device_node *np = pdev->dev.of_node;
> 
> @@ -3207,17 +3207,17 @@ static void fec_reset_phy(struct platform_device
> *pdev)
>  	if (!gpio_is_valid(phy_reset))
>  		return;
> 
> -	active_low = of_property_read_bool(np, "phy-reset-active-low");
> +	active_high = of_property_read_bool(np, "phy-reset-active-high");
> 
>  	err = devm_gpio_request_one(&pdev->dev, phy_reset,
> -			active_low ? GPIOF_OUT_INIT_HIGH :
> GPIOF_OUT_INIT_LOW,
> +			active_high ? GPIOF_OUT_INIT_HIGH :
> GPIOF_OUT_INIT_LOW,
>  			"phy-reset");
>  	if (err) {
>  		dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n",
> err);
>  		return;
>  	}
>  	msleep(msec);
> -	gpio_set_value_cansleep(phy_reset, !active_low);
> +	gpio_set_value_cansleep(phy_reset, !active_high);
>  }
>  #else /* CONFIG_OF */
>  static void fec_reset_phy(struct platform_device *pdev)
> --
> 2.7.2
Rename "phy-reset-active-low" to "phy-reset-active-high" is more reasonable, not confuse us. Thanks.

Acked-by: Fugang Duan <fugang.duan@nxp.com>

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH] net: fec: Rename "phy-reset-active-low" property Bernhard Walle <bernhard@bwalle.de> - 2016-03-03 10:50 +0100
  RE: [PATCH] net: fec: Rename "phy-reset-active-low" property Fugang Duan <fugang.duan@nxp.com> - 2016-03-04 07:10 +0100
  Re: [PATCH] net: fec: Rename "phy-reset-active-low" property David Miller <davem@davemloft.net> - 2016-03-07 04:50 +0100

csiph-web