Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1345639
| From | Harvey Hunt <harvey.hunt@imgtec.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v3 39/52] mtd: nand: jz4780: switch to mtd_ooblayout_ops |
| Date | 2016-02-29 11:50 +0100 |
| Message-ID | <r7tyO-1SB-25@gated-at.bofh.it> (permalink) |
| References | <r6eVb-3Cr-3@gated-at.bofh.it> <r6f4V-3Xh-75@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi Boris,
On 26/02/16 00:57, Boris Brezillon wrote:
> Implementing the mtd_ooblayout_ops interface is the new way of exposing
> ECC/OOB layout to MTD users.
>
> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---
> drivers/mtd/nand/jz4780_nand.c | 19 +++++--------------
> 1 file changed, 5 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c
> index e1c016c..b86a579 100644
> --- a/drivers/mtd/nand/jz4780_nand.c
> +++ b/drivers/mtd/nand/jz4780_nand.c
> @@ -56,8 +56,6 @@ struct jz4780_nand_chip {
> struct nand_chip chip;
> struct list_head chip_list;
>
> - struct nand_ecclayout ecclayout;
> -
> struct gpio_desc *busy_gpio;
> struct gpio_desc *wp_gpio;
> unsigned int reading: 1;
> @@ -165,8 +163,7 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
> struct nand_chip *chip = &nand->chip;
> struct mtd_info *mtd = nand_to_mtd(chip);
> struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller);
> - struct nand_ecclayout *layout = &nand->ecclayout;
> - u32 start, i;
> + int eccbytes;
>
> chip->ecc.bytes = fls((1 + 8) * chip->ecc.size) *
> (chip->ecc.strength / 8);
> @@ -201,23 +198,17 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
> return 0;
>
> /* Generate ECC layout. ECC codes are right aligned in the OOB area. */
> - layout->eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
> + eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
>
> - if (layout->eccbytes > mtd->oobsize - 2) {
> + if (eccbytes > mtd->oobsize - 2) {
> dev_err(dev,
> "invalid ECC config: required %d ECC bytes, but only %d are available",
> - layout->eccbytes, mtd->oobsize - 2);
> + eccbytes, mtd->oobsize - 2);
> return -EINVAL;
> }
>
> - start = mtd->oobsize - layout->eccbytes;
> - for (i = 0; i < layout->eccbytes; i++)
> - layout->eccpos[i] = start + i;
> -
> - layout->oobfree[0].offset = 2;
> - layout->oobfree[0].length = mtd->oobsize - layout->eccbytes - 2;
> + mtd->ooblayout = &nand_ooblayout_lp_ops;
>
> - chip->ecc.layout = layout;
> return 0;
> }
>
>
With your patch applied [0] that you gave me earlier in the patchset, I
am able to boot to userland on my Ci20 (jz4780_{nand,bch}) with a NAND
rootfs. So, dependant upon that patch (or equivalent) being added to
this patchset:
Tested-by: Harvey Hunt <harvey.hunt@imgtec.com>
Thanks,
Harvey
[0] http://code.bulix.org/36oytz-91960
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH v3 00/52] mtd: rework ECC layout definition Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:00 +0100
[PATCH v3 04/52] mtd: nand: simplify nand_bch_init() usage Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:00 +0100
[PATCH v3 01/52] mtd: kill the ecclayout->oobavail field Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:00 +0100
[PATCH v3 05/52] mtd: add mtd_ooblayout_xxx() helper functions Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:00 +0100
[PATCH v3 03/52] mtd: mtdswap: remove useless if (!mtd->ecclayout) test Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:00 +0100
[PATCH v3 02/52] mtd: create an mtd_oobavail() helper and make use of it Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:00 +0100
[PATCH v3 11/52] mtd: nand: lpc32xx: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 22/52] mtd: nand: bch: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 28/52] mtd: nand: cafe: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 40/52] mtd: nand: lpc32xx: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 24/52] mtd: nand: jz4740: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 20/52] mtd: docg3: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 36/52] mtd: nand: fsmc: get rid of the fsmc_nand_eccplace struct Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 21/52] mtd: nand: implement the default mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 16/52] mtd: nand: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 19/52] mtd: create an mtd_ooblayout_ops struct to ease ECC layout definition Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 12/52] mtd: nand: omap2: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 15/52] mtd: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 26/52] mtd: nand: bf5xx: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 27/52] mtd: nand: brcm: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 44/52] mtd: nand: s3c2410: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 13/52] mtd: onenand: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 45/52] mtd: nand: sh_flctl: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 25/52] mtd: nand: atmel: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 31/52] mtd: nand: diskonchip: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 34/52] mtd: nand: fsl_ifc: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 41/52] mtd: nand: mxc: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 42/52] mtd: nand: omap2: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 43/52] mtd: nand: pxa3xx: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 32/52] mtd: nand: docg4: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 14/52] mtd: add mtd_set_ecclayout() helper function Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 23/52] mtd: nand: sharpsl: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 39/52] mtd: nand: jz4780: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
Re: [PATCH v3 39/52] mtd: nand: jz4780: switch to mtd_ooblayout_ops Harvey Hunt <harvey.hunt@imgtec.com> - 2016-02-29 11:50 +0100
[PATCH v3 29/52] mtd: nand: davinci: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 30/52] mtd: nand: denali: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 17/52] mtd: onenand: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 18/52] mtd: docg3: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 33/52] mtd: nand: fsl_elbc: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:10 +0100
[PATCH v3 48/52] mtd: nand: vf610: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:20 +0100
Re: [PATCH v3 48/52] mtd: nand: vf610: switch to mtd_ooblayout_ops Stefan Agner <stefan@agner.ch> - 2016-02-26 20:50 +0100
Re: [PATCH v3 48/52] mtd: nand: vf610: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 21:50 +0100
[PATCH v3 38/52] mtd: nand: hisi504: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:20 +0100
[PATCH v3 06/52] mtd: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:20 +0100
[PATCH v3 52/52] mtd: kill the nand_ecclayout struct Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:20 +0100
[PATCH v3 47/52] mtd: nand: sunxi: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:20 +0100
[PATCH v3 51/52] mtd: nand: kill the ecc->layout field Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:20 +0100
[PATCH v3 49/52] mtd: onenand: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:20 +0100
[PATCH v3 46/52] mtd: nand: sm_common: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:20 +0100
[PATCH v3 37/52] mtd: nand: gpmi: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:20 +0100
[PATCH v3 50/52] staging: mt29f_spinand: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:20 +0100
[PATCH v3 35/52] mtd: nand: fsmc: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 02:20 +0100
Re: [PATCH v3 00/52] mtd: rework ECC layout definition Stefan Agner <stefan@agner.ch> - 2016-02-26 02:40 +0100
Re: [PATCH v3 00/52] mtd: rework ECC layout definition Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-26 03:50 +0100
csiph-web