[PATCH 6/7] regulator: act8865: Specify fixed voltage of 3.3V for ACT8600's REG9

From	Maarten ter Huurne <maarten@treewalker.org>
Newsgroups	linux.kernel
Subject	[PATCH 6/7] regulator: act8865: Specify fixed voltage of 3.3V for ACT8600's REG9
Date	2016-02-28 17:00 +0100
Message-ID	<r7bVf-4Ib-1@gated-at.bofh.it> (permalink)
References	<r7bVf-4Ib-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

The documentation lists both 1.8V and 3.3V for this regulator output,
but 3.3V is mentioned more often and also matches what JZ4770 and
JZ4780 expect as an input.

Note that the voltage of REG9 is not programmable, so this commit only
changes the voltage reported in sysfs and debugfs, not the actual
output voltage of the hardware.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
---
 drivers/regulator/act8865-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index cdfe082..ac6956d 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -267,7 +267,7 @@ static const struct regulator_desc act8600_regulators[] = {
 		.ops = &act8865_ldo_ops,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = 1,
-		.fixed_uV = 1800000,
+		.fixed_uV = 3300000,
 		.enable_reg = ACT8600_LDO910_CTRL,
 		.enable_mask = ACT8865_ENA,
 		.owner = THIS_MODULE,
-- 
2.6.2

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH 6/7] regulator: act8865: Specify fixed voltage of 3.3V for ACT8600's REG9 Maarten ter Huurne <maarten@treewalker.org> - 2016-02-28 17:00 +0100

csiph-web