Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1343046

Re: [PATCH V4 2/4] gpio: gpio-f81504: Add Fintek F81504/508/512 PCIE-to-UART/GPIO GPIOLIB support

Show all headers | View raw

On Tue, Feb 23, 2016 at 7:30 AM, Peter Hung <hpeter@gmail.com> wrote:

> This driver is GPIOLIB driver for F81504/508/512, it'll handle the
> GPIOLIB operation of this device. This module will depend on
> MFD_FINTEK_F81504_CORE.
>
> IC function list:
>     F81504: Max 2x8 GPIOs and max 4 serial ports
>         port2/3 are multi-function
>     F81508: Max 6x8 GPIOs and max 8 serial ports
>         port2/3 are multi-function, port8/9/10/11 are gpio only
>     F81512: Max 6x8 GPIOs and max 12 serial ports
>         port2/3/8/9/10/11 are multi-function
>
> GPIO register:
> PCI Configuration space:
>     F0h: bit0~5: Enable GPIO0~5
>          bit6~7: Reserve
>     F3h: bit0~5: Multi-Functional Flag (0:GPIO/1:UART)
>          bit0: UART2 pin out for UART2 / GPIO0
>          bit1: UART3 pin out for UART3 / GPIO1
>          bit2: UART8 pin out for UART8 / GPIO2
>          bit3: UART9 pin out for UART9 / GPIO3
>          bit4: UART10 pin out for UART10 / GPIO4
>          bit5: UART11 pin out for UART11 / GPIO5
>          bit6~7: Reserve
>     F1h: IO address (LSB)
>     F2h: IO address (MSB)
>     F8h + 8 * set: Direction control (bitwise)
>          bitx: 0 - Input mode
>          bitx: 1 - Output mode
>     F9h + 8 * set: Drive ability control (bitwise)
>          bitx: 0 - Open drain (default)
>          bitx: 1 - Push Pull
>          In this driver, we only implements open drain mode.
>
> IO space:
>     (IO base + 0~5): GPIO-0x~5x in/out value (bitwise)
>
> Suggested-by: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
> Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>

I assume this must do in through the MFD or TTY tree with the rest.
There is a new devm_gpiochip_add_data() coming into the GPIO tree
but we can patch it to use that later. (Note to Laxman to revisit...)

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH V4 2/4] gpio: gpio-f81504: Add Fintek F81504/508/512 PCIE-to-UART/GPIO GPIOLIB support Peter Hung <hpeter@gmail.com> - 2016-02-23 07:40 +0100
  Re: [PATCH V4 2/4] gpio: gpio-f81504: Add Fintek F81504/508/512  PCIE-to-UART/GPIO GPIOLIB support Linus Walleij <linus.walleij@linaro.org> - 2016-02-25 11:00 +0100

csiph-web