Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1342298

Re: [PATCH 3/3] arm64: dts: register Hi6220's thermal zone for power allocator

Show all headers | View raw

On Sat, Feb 20, 2016 at 11:52:09PM +0800, Leo Yan wrote:
> With profiling Hi6220's power modeling so get dynamic coefficient and
> sustainable power. So pass these parameters from DT.
> 
> Now enable power allocator wit only one actor for CPU part, so directly
> use cluster0's thermal sensor for monitoring temperature.
> 
> Signed-off-by: Leo Yan <leo.yan@linaro.org>
> ---
>  arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 36 +++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 50ba1b0..3608a3e 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -6,6 +6,7 @@
>  
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/clock/hi6220-clock.h>
> +#include <dt-bindings/thermal/thermal.h>
>  
>  / {
>  	compatible = "hisilicon,hi6220";
> @@ -87,6 +88,7 @@
>  			cooling-max-level = <0>;
>  			#cooling-cells = <2>; /* min followed by max */
>  			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
> +			dynamic-power-coefficient = <311>;
>  		};
>  
>  		cpu1: cpu@1 {
> @@ -322,5 +324,39 @@
>  			clock-names = "thermal_clk";
>  			#thermal-sensor-cells = <1>;
>  		};
> +
> +		thermal-zones {
> +
> +			cls0: cls0 {
> +				polling-delay = <1000>;
> +				polling-delay-passive = <100>;
> +				sustainable-power = <3326>;
> +
> +				/* sensor ID */
> +				thermal-sensors = <&tsensor 2>;
> +
> +				trips {
> +					threshold: trip-point@0 {
> +						temperature = <65000>;
> +						hysteresis = <1000>;

As far as I know, hysteresis is ignored in the thermal subsystem right
now, so you could remove it from both trip points.

> +						type = "passive";
> +					};
> +
> +					target: trip-point@1 {
> +						temperature = <75000>;
> +						hysteresis = <1000>;
> +						type = "passive";
> +					};
> +				};
> +
> +				cooling-maps {
> +					map0 {
> +						trip = <&target>;
> +						contribution = <1024>;

As Hikey has only one voltage domain, you only have one cpu cooling
device.  "contribution" is only useful when you have more than one
cooling device, as it's relative to the other cooling device's
contribution.  You can remove contribution from here.

Other than this minor stuff, it looks good to me. FWIW,

Reviewed-by: Javi Merino <javi.merino@arm.com>

> +						cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +					};
> +				};
> +			};
> +		};
>  	};
>  };

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH 3/3] arm64: dts: register Hi6220's thermal zone for power  allocator Javi Merino <javi.merino@arm.com> - 2016-02-24 19:30 +0100
  Re: [PATCH 3/3] arm64: dts: register Hi6220's thermal zone for power  allocator Leo Yan <leo.yan@linaro.org> - 2016-02-25 03:50 +0100

csiph-web