Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1341707

Re: [PATCH v5 10/26] mtd: nand: omap: Update DT binding documentation

Show all headers | View raw

On 23/02/16 21:41, Rob Herring wrote:
> On Fri, Feb 19, 2016 at 11:15:32PM +0200, Roger Quadros wrote:
>> Add compatible id and interrupts. The NAND interrupts are
>> provided by the GPMC controller node.
> 
> This doesn't look like a backwards compatible change.

The existing OMAP NAND DT implementation doesn't even need a compatible id
in its DT node and so we are not intending to keep it backward compatible.

We are placing a warning instead if we encounter an old style NAND node.

> 
> 
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>>  Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 17 +++++++++++++----
>>  1 file changed, 13 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
>> index fb733c4..810b87b 100644
>> --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
>> +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
>> @@ -13,7 +13,11 @@ Documentation/devicetree/bindings/mtd/nand.txt
>>  
>>  Required properties:
>>  
>> - - reg:		The CS line the peripheral is connected to
>> + - compatible:	"ti,omap2-nand"
>> + - reg:		range id (CS number), base offset and length of the
>> +		NAND I/O space
>> + - interrupt-parent: must point to gpmc node
>> + - interrupts:	Two interrupt specifiers, one for fifoevent, one for termcount.
>>  
>>  Optional properties:
>>  
>> @@ -55,20 +59,25 @@ Example for an AM33xx board:
>>  	gpmc: gpmc@50000000 {
>>  		compatible = "ti,am3352-gpmc";
>>  		ti,hwmods = "gpmc";
>> -		reg = <0x50000000 0x1000000>;
>> +		reg = <0x50000000 0x36c>;
>>  		interrupts = <100>;
>>  		gpmc,num-cs = <8>;
>>  		gpmc,num-waitpins = <2>;
>>  		#address-cells = <2>;
>>  		#size-cells = <1>;
>> -		ranges = <0 0 0x08000000 0x2000>;	/* CS0: NAND */
>> +		ranges = <0 0 0x08000000 0x1000000>;	/* CS0 space, 16MB */
>>  		elm_id = <&elm>;
>>  
>>  		nand@0,0 {
>> -			reg = <0 0 0>; /* CS0, offset 0 */
>> +			compatible = "ti,omap2-nand";
>> +			reg = <0 0 4>;		/* CS0, offset 0, NAND I/O window 4 */
>> +			interrupt-parent = <&gpmc>;
> 
> gpmc also needs an interrupt-controller property.

Yes. will fix.
> 
>> +			interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE NONE>;
>>  			nand-bus-width = <16>;
>>  			ti,nand-ecc-opt = "bch8";
>>  			ti,nand-xfer-type = "polled";
>> +			interrupt-parent = <&gpmc>;
>> +			interrupts = <0>, <1>;
> 
> Twice?

oops. will remove this.

> 
>>  
>>  			gpmc,sync-clk-ps = <0>;
>>  			gpmc,cs-on-ns = <0>;
>> -- 
>> 2.1.4
>>

cheers,
-roger

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: [PATCH v5 10/26] mtd: nand: omap: Update DT binding documentation Rob Herring <robh@kernel.org> - 2016-02-23 20:50 +0100
  Re: [PATCH v5 10/26] mtd: nand: omap: Update DT binding documentation Roger Quadros <rogerq@ti.com> - 2016-02-24 11:00 +0100

csiph-web