Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1339218
| From | Krzysztof Adamski <krzysztof.adamski@tieto.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH] regulator: core: Request GPIO before creating sysfs entries |
| Date | 2016-02-22 09:30 +0100 |
| Message-ID | <r4U2t-2Si-3@gated-at.bofh.it> (permalink) |
| Organization | linux.* mail to news gateway |
regulator_attr_is_visible (which is a .is_visible callback of
regulator_dev_group attribute_grpup) checks rdev->ena_pin to decide if
"status" file should be present in sysfs. This field is set at the end
of regulator_ena_gpio_request so it has to be called before
device_register() otherwise this test will always fail, causing "status"
file to not be visible.
Since regulator_attr_is_visible also tests for is_enabled() op, this
problem is only visible for regulators that does not define this
callback, like regulator-fixed.c.
Signed-off-by: Krzysztof Adamski <krzysztof.adamski@tieto.com>
---
drivers/regulator/core.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 4405be1..6ee9ba4 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -3913,6 +3913,16 @@ regulator_register(const struct regulator_desc *regulator_desc,
goto clean;
}
+ if ((config->ena_gpio || config->ena_gpio_initialized) &&
+ gpio_is_valid(config->ena_gpio)) {
+ ret = regulator_ena_gpio_request(rdev, config);
+ if (ret != 0) {
+ rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
+ config->ena_gpio, ret);
+ goto wash;
+ }
+ }
+
/* register with sysfs */
rdev->dev.class = ®ulator_class;
rdev->dev.parent = dev;
@@ -3926,16 +3936,6 @@ regulator_register(const struct regulator_desc *regulator_desc,
dev_set_drvdata(&rdev->dev, rdev);
- if ((config->ena_gpio || config->ena_gpio_initialized) &&
- gpio_is_valid(config->ena_gpio)) {
- ret = regulator_ena_gpio_request(rdev, config);
- if (ret != 0) {
- rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
- config->ena_gpio, ret);
- goto wash;
- }
- }
-
/* set regulator constraints */
if (init_data)
constraints = &init_data->constraints;
--
2.1.4
Back to linux.kernel | Previous | Next | Find similar | Unroll thread
[PATCH] regulator: core: Request GPIO before creating sysfs entries Krzysztof Adamski <krzysztof.adamski@tieto.com> - 2016-02-22 09:30 +0100
csiph-web