Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1338602

Re: 4.5-rc4 kernel is failed to bootup on CN6880

Show all headers | View raw

On 02/19/2016 05:12 PM, Yang Shi wrote:
> Hi David,
>
> I tried to boot 4.5-rc4 kernel on my CN6880 board, but it is failed at
> booting up secondary cores. The error is:

Have you had luck with any other kernel.org versions?

FWIW, I recently posed some patches that may help.  I haven't recently 
tested on cn68xx though, so I can't really say what it might be.


>
> CPU31 revision is: 000d9101 (Cavium Octeon II)
> SMP: Booting CPU32 (CoreId 32)...
> Secondary boot timeout
>
> I passed "numcores=32" in kernel commandline since there are 32 cores
> ion CN6880. And, the bootloader information is as below:
>
> U-Boot 2013.07 ( (U-BOOT build: 104, SDK version: 3.1.1-544),
> svnversion: u-boot:107133M, exec:)-svn107117 (Build time: Oct 31 2014 -
> 19:39:37)
>
> Skipping PCIe port 0 BIST, reset not done. (port not configured)
> Skipping PCIe port 1 BIST, reset not done. (port not configured)
> BIST check passed.
> EBB6800 board revision major:2, minor:0, serial #: 2011-2.0-00120
> OCTEON CN6880-AAP pass 1.1, Core clock: 1200 MHz, IO clock: 800 MHz, DDR
> clock: 667 MHz (1334 Mhz DDR)
> Base DRAM address used by u-boot: 0x20f000000, size: 0x1000000
> DRAM: 8 GiB
> Clearing DRAM...... done
> NAND:  4096 MiB
> Registered IDE device 0 from IDE bus:dev 0:0
> Flash: 8 MiB
> 0:PCIe: Port 0 is unknown, skipping.
> 0:PCIe: Port 1 is unknown, skipping.
> PCI console init succeeded, 1 consoles, 1024 bytes each
> Net:   octmgmt0, octeth0, octeth1, octeth2, octeth3
> Bus 0: OK
>    Device 0: Model: CF 1GB Firm: 20071116 Ser#: TSS20037110113081057
>              Type: Hard Disk
>              Capacity: 967.6 MB = 0.9 GB (1981728 x 512)
> USB0:   USB EHCI 1.00
> scanning bus 0 for devices... 1 USB Device(s) found
> Type the command 'usb start' to scan for USB storage devices.
>
>
> Any hint is appreciated.
>
> Thanks,
> Yang
>

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Re: 4.5-rc4 kernel is failed to bootup on CN6880 David Daney <ddaney@caviumnetworks.com> - 2016-02-20 02:20 +0100
  Re: 4.5-rc4 kernel is failed to bootup on CN6880 Yang Shi <yang.shi@windriver.com> - 2016-02-20 02:30 +0100

csiph-web