Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1333366
| From | Vivien Didelot <vivien.didelot@savoirfairelinux.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH RFC 2/3] net: bridge: set forwarding state on port removal |
| Date | 2016-02-13 22:50 +0100 |
| Message-ID | <r1QeK-1UL-15@gated-at.bofh.it> (permalink) |
| References | <r1tBw-44h-7@gated-at.bofh.it> <r1tBx-44h-17@gated-at.bofh.it> <r1Psm-1ot-13@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi Ido, Ido Schimmel <idosch@mellanox.com> writes: > Fri, Feb 12, 2016 at 11:34:19PM IST, vivien.didelot@savoirfairelinux.com wrote: > > Hi Vivien, > >>When a port leaves a bridge, the bridge layer puts its STP state to >>Disabled. If the port is part of an hardware switch, the mode needs to >>be set to Forwarding in order to restore communication with the CPU. >> >>Call br_set_state() in del_nbp(), which only affects switchdev users. >> >>Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> >>--- > > If you have a LAG device in the bridge and one of the ports leaves the > LAG, then the bridge's teardown sequence isn't invoked and you need to > do the cleanup yourself, by calling your dsa_slave_bridge_port_leave() > function (just an example, I know you don't currently support this). > > With this change, you'll have to call both the > dsa_slave_bridge_port_leave() function and dsa_slave_stp_update() > instead of always calling the same one when leaving a bridge. > > Also, I think this kind of things should be done by drivers, as it's > specific to them. For example, in the case of a physical port, this > wouldn't benefit mlxsw at all, as STP state is a per-VLAN setting and > since VLANs were already flushed in nbp_vlan_flush(), then nothing would > happen. Thanks for the explanation! I drop this RFC then. Best, -v
Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread
[PATCH RFC 2/3] net: bridge: set forwarding state on port removal Vivien Didelot <vivien.didelot@savoirfairelinux.com> - 2016-02-12 22:40 +0100
Re: [PATCH RFC 2/3] net: bridge: set forwarding state on port removal Ido Schimmel <idosch@mellanox.com> - 2016-02-13 22:00 +0100
Re: [PATCH RFC 2/3] net: bridge: set forwarding state on port removal Vivien Didelot <vivien.didelot@savoirfairelinux.com> - 2016-02-13 22:50 +0100
csiph-web