Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1330972
| From | Yishai Hadas <yishaih@dev.mellanox.co.il> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH 3/5] net/mlx4: fix some error handling in mlx4_multi_func_init() |
| Date | 2016-02-10 10:50 +0100 |
| Message-ID | <r0zzk-sv-7@gated-at.bofh.it> (permalink) |
| References | <r0mVr-wW-3@gated-at.bofh.it> <r0mVt-wW-39@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On 2/9/2016 10:11 PM, Rasmus Villemoes wrote:
> The while loop after err_slaves should use post-decrement; otherwise
> we'll fail to do the kfrees for i==0, and will run into out-of-bounds
> accesses if the setup above failed already at i==0.
>
> The predecrement in the --port is ok, since ->vlan_filter is
> (bizarrely) 1-indexed. But I'm changing 'if' to 'while' since it's a
> bit ugly to rely on MLX4_MAX_PORTS being 2.
>
> [I'm not sure why one even bothers populating the ->vlan_filter array:
> mlx4.h isn't #included by anything outside
> drivers/net/ethernet/mellanox/mlx4/, and "git grep -C2 -w vlan_filter
> drivers/net/ethernet/mellanox/mlx4/" seems to suggest that the
> vlan_filter elements aren't used at all.]
>
> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
> ---
> drivers/net/ethernet/mellanox/mlx4/cmd.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
> index d48d5793407d..bfe8234abbba 100644
> --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
> +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
> @@ -2369,7 +2369,7 @@ int mlx4_multi_func_init(struct mlx4_dev *dev)
> kzalloc(sizeof(struct mlx4_vlan_fltr),
> GFP_KERNEL);
> if (!s_state->vlan_filter[port]) {
> - if (--port)
> + while (--port)
Prefer to leave as-is. There is no way that mlx4 will ever have more
than 2 ports.
> kfree(s_state->vlan_filter[port]);
> goto err_slaves;
> }
> @@ -2429,7 +2429,7 @@ err_thread:
> flush_workqueue(priv->mfunc.master.comm_wq);
> destroy_workqueue(priv->mfunc.master.comm_wq);
> err_slaves:
> - while (--i) {
> + while (i--) {
This fix is wrong as it hits the case that i arrived the last value then
below code will access to a non valid entry in the array.
The expected fix should be:
while (--i >= 0)
> for (port = 1; port <= MLX4_MAX_PORTS; port++)
> kfree(priv->mfunc.master.slave_state[i].vlan_filter[port]);
> }
>
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH 0/5] pre-decrement in error paths considered harmful Rasmus Villemoes <linux@rasmusvillemoes.dk> - 2016-02-09 21:20 +0100
[PATCH 5/5] mm/backing-dev.c: fix error path in wb_init() Rasmus Villemoes <linux@rasmusvillemoes.dk> - 2016-02-09 21:20 +0100
[PATCH 4/5] net: sxgbe: fix error paths in sxgbe_platform_probe() Rasmus Villemoes <linux@rasmusvillemoes.dk> - 2016-02-09 21:20 +0100
[PATCH 1/5] drm/gma500: fix error path in gma_intel_setup_gmbus() Rasmus Villemoes <linux@rasmusvillemoes.dk> - 2016-02-09 21:20 +0100
Re: [PATCH 1/5] drm/gma500: fix error path in gma_intel_setup_gmbus() Andy Shevchenko <andy.shevchenko@gmail.com> - 2016-02-10 07:50 +0100
Re: [PATCH 1/5] drm/gma500: fix error path in gma_intel_setup_gmbus() Daniel Vetter <daniel@ffwll.ch> - 2016-02-10 08:30 +0100
[PATCH 3/5] net/mlx4: fix some error handling in mlx4_multi_func_init() Rasmus Villemoes <linux@rasmusvillemoes.dk> - 2016-02-09 21:20 +0100
Re: [PATCH 3/5] net/mlx4: fix some error handling in mlx4_multi_func_init() Yishai Hadas <yishaih@dev.mellanox.co.il> - 2016-02-10 10:50 +0100
Re: [PATCH 3/5] net/mlx4: fix some error handling in mlx4_multi_func_init() Rasmus Villemoes <linux@rasmusvillemoes.dk> - 2016-02-10 19:20 +0100
Re: [PATCH 3/5] net/mlx4: fix some error handling in mlx4_multi_func_init() Jack Morgenstein <jackm@dev.mellanox.co.il> - 2016-02-11 10:30 +0100
Re: [PATCH 3/5] net/mlx4: fix some error handling in mlx4_multi_func_init() Jack Morgenstein <jackm@dev.mellanox.co.il> - 2016-02-11 11:30 +0100
Re: [PATCH 3/5] net/mlx4: fix some error handling in mlx4_multi_func_init() Doug Ledford <dledford@redhat.com> - 2016-02-11 17:10 +0100
csiph-web