Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1330555

Re: [PATCH V7 1/8] mfd: add device-tree binding doc for PMIC max77620/max20024

From Laxman Dewangan <ldewangan@nvidia.com>
Newsgroups linux.kernel
Subject Re: [PATCH V7 1/8] mfd: add device-tree binding doc for PMIC max77620/max20024
Date 2016-02-09 19:10 +0100
Message-ID <r0kTG-7Hi-37@gated-at.bofh.it> (permalink)
References <qWH2q-6AY-7@gated-at.bofh.it> <qWH2r-6AY-21@gated-at.bofh.it> <r0iI9-637-9@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


On Tuesday 09 February 2016 09:12 PM, Lee Jones wrote:
> On Sat, 30 Jan 2016, Laxman Dewangan wrote:
>
> +	Normal mode also called as active mode on which all step-down
> +		regulators, all linear regulators, GPIOs, and the 32kHz
> +		oscillator are in normal active mode.
> +	sleep mode: Regulators/GPIOs/clock can go on OFF state based on
> "can go on OFF state"?

Regulator/GPIO has two states, enable and disable. If sleep mode is 
configured for these resource and external signal triggers to sleep then 
this get disabled.
>> +	Different modes of regulators/clock/GPIOs are controlled by the their
>> +FPS configurations. There is different configuration registers for each of
>> +these resources. Typical configurations per resource are:
>> +	FPS source: 	Attach the resource to required FPS source. When
>> +			resources are attached to one of FPS source then
>> +			resournce can be enable/disable when related FPS
> Have you used spell check?  I suggest you do.

My bad, I did but mixed with technical ignorance. Will try best.

>
>> +			source gets the control signal for ON and OFF.
>> +	Power on slot: 	Slot number on which resource is ON once FPS source
>> +			get ON signal.
> Can you find another way of explaining this please?

Hmm..
Does it look fine:
There is 8 slots for each FPS on which resource can get enabled. This 
property provides the slot number on which resource gets enabled after 
FPS sequence started.


>
>
> +
> +-maxim,enable-sleep: 		    Boolean, enable sleep state of PMIC
> We already have bindings for sleeping.  Please use a generic one.

Which property? Saw sleep property with vendor prefix.

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

Re: [PATCH V7 1/8] mfd: add device-tree binding doc for PMIC  max77620/max20024 Lee Jones <lee.jones@linaro.org> - 2016-02-09 16:50 +0100
  Re: [PATCH V7 1/8] mfd: add device-tree binding doc for PMIC max77620/max20024 Laxman Dewangan <ldewangan@nvidia.com> - 2016-02-09 19:10 +0100
    Re: [PATCH V7 1/8] mfd: add device-tree binding doc for PMIC  max77620/max20024 Lee Jones <lee.jones@linaro.org> - 2016-02-10 14:30 +0100
      Re: [PATCH V7 1/8] mfd: add device-tree binding doc for PMIC max77620/max20024 Laxman Dewangan <ldewangan@nvidia.com> - 2016-02-10 15:10 +0100
        Re: [PATCH V7 1/8] mfd: add device-tree binding doc for PMIC  max77620/max20024 Lee Jones <lee.jones@linaro.org> - 2016-02-11 10:30 +0100
          Re: [PATCH V7 1/8] mfd: add device-tree binding doc for PMIC max77620/max20024 Laxman Dewangan <ldewangan@nvidia.com> - 2016-02-11 11:40 +0100

csiph-web