[PATCH v4 4/5] ARM: dts: sun8i-h3: Add R_PIO controller node to the dtsi

From	Krzysztof Adamski <krzysztof.adamski@tieto.com>
Newsgroups	linux.kernel
Subject	[PATCH v4 4/5] ARM: dts: sun8i-h3: Add R_PIO controller node to the dtsi
Date	2016-02-09 16:00 +0100
Message-ID	<r0hVM-5pW-5@gated-at.bofh.it> (permalink)
References	<r0hVM-5pW-7@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Add the corresponding device node for R_PIO on H3 to the dtsi. Support
for the controller was added in earlier commit.

Signed-off-by: Krzysztof Adamski <k@japko.eu>
---
 arch/arm/boot/dts/sun8i-h3.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index a7b2c53..528e34c 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -526,5 +526,17 @@
 			compatible = "allwinner,sun6i-a31-clock-reset";
 			#reset-cells = <1>;
 		};
+
+		r_pio: pinctrl@01f02c00 {
+			compatible = "allwinner,sun8i-h3-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>;
+			resets = <&apb0_reset 0>;
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
 	};
 };
-- 
2.1.4

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH v4 4/5] ARM: dts: sun8i-h3: Add R_PIO controller node to the dtsi Krzysztof Adamski <krzysztof.adamski@tieto.com> - 2016-02-09 16:00 +0100

csiph-web