Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1278749

Re: [PATCH v2 3/9] Documentation: dt-bindings: leds: add LM3633 LED binding information

Show all headers | View raw

Hi Milo,

On 11/26/2015 07:56 AM, Milo Kim wrote:
> LM3633 LED device is one of TI LMU device list.
>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: devicetree@vger.kernel.org
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: linux-leds@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Milo Kim <milo.kim@ti.com>
> ---
>   .../devicetree/bindings/leds/leds-lm3633.txt       | 24 ++++++++++++++++++++++
>   1 file changed, 24 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3633.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-lm3633.txt b/Documentation/devicetree/bindings/leds/leds-lm3633.txt
> new file mode 100644
> index 0000000..a553894
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-lm3633.txt
> @@ -0,0 +1,24 @@
> +TI LMU LM3633 LED device tree bindings
> +
> +Required properties:
> +  - compatible: "ti,lm3633-leds"
> +
> +Child nodes:
> +  Each node matches with LED control bank.
> +  Please refer to the datasheet [1].

leds/common.txt documentation says that child nodes represent discrete
LED elements.

> +  Required properties of a child node:
> +  - led-sources: List of enabled channels from 0 to 5.
> +                 Please refer to LED binding [2].

led-sources property should contain always one element -
a control bank identifier that the iout is to be associated with.
For example, if there are three LEDs and they should be controlled
with control bank A, then the bindings should look as follows
(assuming that control bank identifiers start from 0 [A:0, B:1,
C:2, etc. - it has to be also explicitly stated in the documentation]:

lvled1 {
	led-sources = <2>;
	led-max-microamp = <1000>;
}

lvled2 {
	led-sources = <2>;
	led-max-microamp = <29000>;
}

lvled3 {
	led-sources = <2>;
	led-max-microamp = <7000>;
}

The driver should expose singled LED class device for this arrangement.

Since all of these LEDs will be controlled by the common bank, the
lowest led-max-micromp constraint value from the three should be taken
as a base for calculating max_brightness property of the LED class
device. Of course in the sane case all these properties should have
the same values.

If the LEDs are to be connected to separate banks, then DT child nodes
should look e.g. as follows (led-max-microamp values are set
arbitrarily here):

lvled4 {
	led-sources = <6>;
	led-max-microamp = <20000>;
}

lvled5 {
	led-sources = <7>;
	led-max-microamp = <17000>;
}

lvled6 {
	led-sources = <8>;
	led-max-microamp = <11000>;
}

You can of course add label properties to the child nodes.
LED class device name could be composed out of LED names
separated with colon, so here it would be:

lvled4:levled5:lvled6

> +  Optional properties of a child node:
> +  - label: LED channel identification. Please refer to LED binding [2].
> +  - led-max-microamp: Max current setting. Type is <u32>.
> +                      Unit is microampere. Range is from 5000 to 30000.
> +                      Step is 1000. Please refer to LED binding [2].
> +
> +Example: Please refer to ti-lmu dt-bindings [3].
> +
> +[1] http://www.ti.com/product/LM3633/datasheet
> +[2] ../leds/common.txt
> +[2] ../mfd/ti-lmu.txt

Last index should be [3] and all references above should be corrected
accordingly.

-- 
Best Regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 3/9] Documentation: dt-bindings: leds: add LM3633 LED binding information Milo Kim <milo.kim@ti.com> - 2015-11-26 08:00 +0100
  Re: [PATCH v2 3/9] Documentation: dt-bindings: leds: add LM3633 LED  binding information Jacek Anaszewski <j.anaszewski@samsung.com> - 2015-11-27 12:20 +0100
    Re: [PATCH v2 3/9] Documentation: dt-bindings: leds: add LM3633 LED  binding information "Kim, Milo" <milo.kim@ti.com> - 2015-11-30 09:20 +0100
      Re: [PATCH v2 3/9] Documentation: dt-bindings: leds: add LM3633 LED  binding information Jacek Anaszewski <j.anaszewski@samsung.com> - 2015-11-30 13:30 +0100

csiph-web