Re: [PATCH v5 1/5] Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.

From	Dave Penkler <dpenkler@gmail.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH v5 1/5] Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.
Date	2015-11-25 10:20 +0100
Message-ID	<qyEp4-4c9-25@gated-at.bofh.it> (permalink)
References	<qw6rv-qW-5@gated-at.bofh.it> <qw6rv-qW-11@gated-at.bofh.it> <qw7GW-1aT-29@gated-at.bofh.it> <qxz85-1Ly-9@gated-at.bofh.it> <qxAdP-2sv-1@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On Sun, Nov 22, 2015 at 12:32:41PM +0200, Andy Shevchenko wrote:
> On Sun, Nov 22, 2015 at 11:19 AM, Dave Penkler <dpenkler@gmail.com> wrote:
> > On Wed, Nov 18, 2015 at 11:55:27AM +0200, Andy Shevchenko wrote:
> >> On Wed, Nov 18, 2015 at 10:37 AM, Dave Penkler <dpenkler@gmail.com> wrote:
> 
> >> > +       switch (status) {
> >> > +       case 0: /* SUCCESS */
> >> > +               if (data->iin_buffer[0] & 0x80) {
> >> > +                       /* check for valid STB notification */
> >> > +                       if ((data->iin_buffer[0] & 0x7f) > 1) {
> >>
> >> Despite your answer to my comment code is quite understandable even with & 0x7e.
> >> You already put comment line about this, you may add that you validate
> >> the value to be 127 >= value >= 2.
> >>
> >
> > Yes it is quite understandable but it is less clear. I repeat my comment here:
> > When reading the spec and the code it is more obvious that here
> > we are testing for the value in bits D6..D0 to be a valid iin_bTag return.
> > (See Table 7 in the USBTMC-USB488 spec.)
> >
> > What is your motivation for
> >
> >  if (data->iin_buffer[0] & 0x7e)
> >
> > ?
> 
> In non-optimized variant it will certainly generate less code. You may
> have check assembly code with -O2 and compare. I don't know if
> compiler is clever enough to do the same by itself.
> 

I tested out both variants, and the explicit test is actually faster on by box:

$ cat tp.c
#include <stdlib.h>
#include <stdio.h>
#define xstr(s) str(s)
#define str(s) #s
main() {
        unsigned int v,s=0;
        struct recs {
                unsigned char *iin_buffer;
        } rec;
        struct recs *data = &rec;
        data->iin_buffer = (unsigned char *) malloc(8);
        for (v=1;v;v++) {
                data->iin_buffer[0] = v & 0x7f;
                if (TEST)
                        s++;
        }
        printf("%s %x\n",xstr(TEST),s);
}
$ cc -O2 tp.c -DTEST='data->iin_buffer[0] & 0x7e'
$ time ./a.out
data->iin_buffer[0] & 0x7e fc000000

real    0m3.927s
user    0m3.920s
sys     0m0.000s
$ time ./a.out
data->iin_buffer[0] & 0x7e fc000000

real    0m3.925s
user    0m3.920s
sys     0m0.000s
$ cc -O2 tp.c -DTEST='(data->iin_buffer[0] & 0x7f) > 1'
$ time ./a.out
(data->iin_buffer[0] & 0x7f) > 1 fc000000

real    0m2.638s
user    0m2.610s
sys     0m0.000s
$ time ./a.out
(data->iin_buffer[0] & 0x7f) > 1 fc000000

real    0m2.648s
user    0m2.620s
sys     0m0.000s

> >> > +               /* urb terminated, clean up */
> >> > +               dev_dbg(&data->intf->dev,
> >> > +                       "%s - urb terminated, status: %d\n",
> >> > +                       __func__, status);
> >>
> >> No need to print function here explicitly. Check Dynamic Debug framework.
> >
> > I am not using dynamic debug but when I enable static debug I get:
> >
> > [ 1438.562458] usbtmc 1-1:1.0: Enter ioctl_read_stb iin_ep_present: 1
> >
> > on the console log for
> >
> > dev_dbg(dev, "Enter ioctl_read_stb iin_ep_present: %d\n",
> >                 data->iin_ep_present);
> >
> > So if I don't print the function it does not appear on the log.
> 
> Whatever maintainers prefer, though I think there are quite rare cases
> in USB when someone needs static debug. I'm pretty sure most of the
> developers all in favour of dynamic debug.
> 

I am happy to remove the func

> >> >         retcode = sysfs_create_group(&intf->dev.kobj, &data_attr_grp);
> >> >
> >> >         retcode = usb_register_dev(intf, &usbtmc_class);
> >>
> >> Hmm??? Unrelated to this patch, but notice that retcode is overridden here.
> 
> 
> 
> -- 
> With Best Regards,
> Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Thread

[PATCH v5 0/5] usb: usbtmc: Add support for missing functions in  USBTMC-USB488 spec Dave Penkler <dpenkler@gmail.com> - 2015-11-18 09:40 +0100
  [PATCH v5 1/5] Implement an ioctl to support the USMTMC-USB488  READ_STATUS_BYTE operation. Dave Penkler <dpenkler@gmail.com> - 2015-11-18 09:40 +0100
    Re: [PATCH v5 1/5] Implement an ioctl to support the USMTMC-USB488  READ_STATUS_BYTE operation. Andy Shevchenko <andy.shevchenko@gmail.com> - 2015-11-18 11:00 +0100
      Re: [PATCH v5 1/5] Implement an ioctl to support the USMTMC-USB488  READ_STATUS_BYTE operation. Dave Penkler <dpenkler@gmail.com> - 2015-11-22 10:30 +0100
        Re: [PATCH v5 1/5] Implement an ioctl to support the USMTMC-USB488  READ_STATUS_BYTE operation. Andy Shevchenko <andy.shevchenko@gmail.com> - 2015-11-22 11:40 +0100
          Re: [PATCH v5 1/5] Implement an ioctl to support the USMTMC-USB488  READ_STATUS_BYTE operation. Dave Penkler <dpenkler@gmail.com> - 2015-11-25 10:20 +0100
            Re: [PATCH v5 1/5] Implement an ioctl to support the USMTMC-USB488  READ_STATUS_BYTE operation. Andy Shevchenko <andy.shevchenko@gmail.com> - 2015-11-25 21:40 +0100
              Re: [PATCH v5 1/5] Implement an ioctl to support the USMTMC-USB488  READ_STATUS_BYTE operation. Dave Penkler <dpenkler@gmail.com> - 2015-11-28 13:00 +0100
                Re: [PATCH v5 1/5] Implement an ioctl to support the USMTMC-USB488  READ_STATUS_BYTE operation. Andy Shevchenko <andy.shevchenko@gmail.com> - 2015-11-28 16:00 +0100
                Re: [PATCH v5 1/5] Implement an ioctl to support the USMTMC-USB488  READ_STATUS_BYTE operation. Dave Penkler <dpenkler@gmail.com> - 2015-11-28 18:50 +0100
                Re: [PATCH v5 1/5] Implement an ioctl to support the USMTMC-USB488  READ_STATUS_BYTE operation. Andy Shevchenko <andy.shevchenko@gmail.com> - 2015-11-28 20:20 +0100
  [PATCH v5 2/5] Add support for USBTMC USB488 SRQ notification with  fasync Dave Penkler <dpenkler@gmail.com> - 2015-11-18 09:40 +0100
  [PATCH v5 5/5] Add ioctls to enable and disable local controls on an  instrument Dave Penkler <dpenkler@gmail.com> - 2015-11-18 09:40 +0100
    Re: [PATCH v5 5/5] Add ioctls to enable and disable local controls on  an instrument Andy Shevchenko <andy.shevchenko@gmail.com> - 2015-11-18 10:50 +0100
      Re: [PATCH v5 5/5] Add ioctls to enable and disable local controls  on an instrument Dave Penkler <dpenkler@gmail.com> - 2015-11-22 10:00 +0100
        Re: [PATCH v5 5/5] Add ioctls to enable and disable local controls on  an instrument Andy Shevchenko <andy.shevchenko@gmail.com> - 2015-11-22 11:40 +0100
          Re: [PATCH v5 5/5] Add ioctls to enable and disable local controls  on an instrument Dave Penkler <dpenkler@gmail.com> - 2015-11-25 10:20 +0100
            Re: [PATCH v5 5/5] Add ioctls to enable and disable local controls on  an instrument Andy Shevchenko <andy.shevchenko@gmail.com> - 2015-11-25 21:50 +0100
  [PATCH v5 4/5] Add ioctl to retrieve USBTMC-USB488 capabilities Dave Penkler <dpenkler@gmail.com> - 2015-11-18 09:40 +0100

csiph-web