Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1272738

Re: [PATCH v2 2/2] usb: dwc2: host: Clear interrupts before handling them

Show all headers | View raw

On 11/16/2015 9:22 AM, Doug Anderson wrote:
> Felipe,
> 
> On Mon, Nov 16, 2015 at 8:28 AM, Felipe Balbi <balbi@ti.com> wrote:
>>
>> Hi,
>>
>> Douglas Anderson <dianders@chromium.org> writes:
>>> In general it is wise to clear interrupts before processing them.  If
>>> you don't do that, you can get:
>>>  1. Interrupt happens
>>>  2. You look at system state and process interrupt
>>>  3. A new interrupt happens
>>>  4. You clear interrupt without processing it.
>>>
>>> This patch was actually a first attempt to fix missing device insertions
>>> as described in (usb: dwc2: host: Fix missing device insertions) and it
>>> did solve some of the signal bouncing problems but not all of
>>> them (which is why I submitted the other patch).  Specifically, this
>>> patch itself would sometimes change:
>>>  1. hardware sees connect
>>>  2. hardware sees disconnect
>>>  3. hardware sees connect
>>>  4. dwc2_port_intr() - clears connect interrupt
>>>  5. dwc2_handle_common_intr() - calls dwc2_hcd_disconnect()
>>>
>>> ...to:
>>>  1. hardware sees connect
>>>  2. hardware sees disconnect
>>>  3. dwc2_port_intr() - clears connect interrupt
>>>  4. hardware sees connect
>>>  5. dwc2_handle_common_intr() - calls dwc2_hcd_disconnect()
>>>
>>> ...but with different timing then sometimes we'd still miss cable
>>> insertions.
>>>
>>> In any case, though this patch doesn't fix any (known) problems, it
>>> still seems wise as a general policy to clear interrupt before handling
>>> them.
>>>
>>> Signed-off-by: Douglas Anderson <dianders@chromium.org>
>>> ---
>>> Changes in v2: None
>>>
>>>  drivers/usb/dwc2/core_intr.c | 55 ++++++++++++++++++++++----------------------
>>>  drivers/usb/dwc2/hcd_intr.c  | 16 ++++++-------
>>>  2 files changed, 35 insertions(+), 36 deletions(-)
>>>
>>> diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
>>> index 61601d16e233..2a166b7eec41 100644
>>> --- a/drivers/usb/dwc2/core_intr.c
>>> +++ b/drivers/usb/dwc2/core_intr.c
>>> @@ -80,15 +80,16 @@ static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg)
>>>   */
>>>  static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg)
>>>  {
>>> -     u32 hprt0 = dwc2_readl(hsotg->regs + HPRT0);
>>> +     u32 hprt0;
>>>
>>> +     /* Clear interrupt */
>>> +     dwc2_writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS);
>>> +
>>> +     hprt0 = dwc2_readl(hsotg->regs + HPRT0);
>>>       if (hprt0 & HPRT0_ENACHG) {
>>>               hprt0 &= ~HPRT0_ENA;
>>>               dwc2_writel(hprt0, hsotg->regs + HPRT0);
>>>       }
>>> -
>>> -     /* Clear interrupt */
>>> -     dwc2_writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS);
>>
>> isn't this a regression ? You're first clearing the interrupts and only
>> then reading to check what's pending, however, what's pending has just
>> been cleared. Seems like this should be:
>>
>> hprt0 = dwc2_readl(HPRT0);
>> dwc2_writeal(PRTINT, GINTSTS);
> 
> Actually, we could probably remove the setting of GINTSTS_PRTINT
> completely.  The docs I have say that the GINTSTS_PRTINT is read only
> and that:
> 
>> The core sets this bit to indicate a change in port status of one of the
>> DWC_otg core ports in Host mode. The application must read the
>> Host Port Control and Status (HPRT) register to determine the exact
>> event that caused this interrupt. The application must clear the
>> appropriate status bit in the Host Port Control and Status register to
>> clear this bit.
> 
> ...so writing PRTINT is probably useless, but John can confirm.
> 

Yup, it seems it can be removed.

John


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH v2 2/2] usb: dwc2: host: Clear interrupts before handling them Felipe Balbi <balbi@ti.com> - 2015-11-16 17:30 +0100
  Re: [PATCH v2 2/2] usb: dwc2: host: Clear interrupts before handling them Doug Anderson <dianders@chromium.org> - 2015-11-16 18:30 +0100
    Re: [PATCH v2 2/2] usb: dwc2: host: Clear interrupts before  handling them John Youn <John.Youn@synopsys.com> - 2015-11-19 02:50 +0100
      Re: [PATCH v2 2/2] usb: dwc2: host: Clear interrupts before handling them Doug Anderson <dianders@chromium.org> - 2015-11-19 17:40 +0100
        Re: [PATCH v2 2/2] usb: dwc2: host: Clear interrupts before handling them Felipe Balbi <balbi@ti.com> - 2015-11-19 19:30 +0100
          Re: [PATCH v2 2/2] usb: dwc2: host: Clear interrupts before  handling them John Youn <John.Youn@synopsys.com> - 2015-11-19 20:20 +0100

csiph-web