[PATCH 36/39] ARM: dts: twl6030: Use OMAP4_IOPAD pinmux macro

Path	csiph.com!eternal-september.org!feeder.eternal-september.org!border1.nntp.ams1.giganews.com!nntp.giganews.com!news.panservice.it!bofh.it!news.nic.it!robomod
From	Javier Martinez Canillas <javier@osg.samsung.com>
Newsgroups	linux.kernel
Subject	[PATCH 36/39] ARM: dts: twl6030: Use OMAP4_IOPAD pinmux macro
Date	Fri, 13 Nov 2015 06:00:02 +0100
Message-ID	<queCS-1MO-1@gated-at.bofh.it> (permalink)
References	<queCS-1MO-3@gated-at.bofh.it>
X-Original-To	linux-kernel@vger.kernel.org
X-Mailer	git-send-email 2.4.3
Sender	robomod@news.nic.it
List-ID	<linux-kernel.vger.kernel.org>
X-Mailing-List	linux-kernel@vger.kernel.org
Approved	robomod@news.nic.it
Lines	41
Organization	linux.* mail to news gateway
X-Original-Cc	linux-omap@vger.kernel.org, Tony Lindgren <tony@atomide.com>, Javier Martinez Canillas <javier@osg.samsung.com>
X-Original-Date	Fri, 13 Nov 2015 01:54:14 -0300
X-Original-Message-ID	<1447390457-1158-37-git-send-email-javier@osg.samsung.com>
X-Original-References	<1447390457-1158-1-git-send-email-javier@osg.samsung.com>
X-Original-Sender	linux-kernel-owner@vger.kernel.org
Xref	csiph.com linux.kernel:1268587

Show key headers only | View raw

Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 arch/arm/boot/dts/twl6030_omap4.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi
index a4fa5703c42b..e373f59cea9c 100644
--- a/arch/arm/boot/dts/twl6030_omap4.dtsi
+++ b/arch/arm/boot/dts/twl6030_omap4.dtsi
@@ -24,7 +24,7 @@
 &omap4_pmx_wkup {
 	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
 		pinctrl-single,pins = <
-			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
+			OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
 		>;
 	};
 };
@@ -32,7 +32,7 @@
 &omap4_pmx_core {
 	twl6030_pins: pinmux_twl6030_pins {
 		pinctrl-single,pins = <
-			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
+			OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
 		>;
 	};
 };
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH 36/39] ARM: dts: twl6030: Use OMAP4_IOPAD pinmux macro Javier Martinez Canillas <javier@osg.samsung.com> - 2015-11-13 06:00 +0100

csiph-web