Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1269530

Re: [PATCH v8] Documentation: add Device tree bindings for hwmon/nct7802

Show all headers | View raw

On Thu, Nov 12, 2015 at 7:26 PM, Rob Herring <robh@kernel.org> wrote:
> On Mon, Oct 26, 2015 at 10:24:17PM +0200, Constantine Shulyupin wrote:
>> From: Constantine Shulyupin <const@MakeLinux.com>
>> +Optional subnodes:
>> +
>> +Sensor subnodes properties:
>> + - "compatible", allowed values:
>> +      - "nuvoton,nct7802"
>
> This should have -sensor appended?

Right.

>> + - "sensor-type", allowed values:
>> +     "thermal-diode"
>> +     "thermistor"
>> +     "voltage"
>> +     "local"
>> +     "vcore"
>> +     "vcc"
>
> These are different connections to the same h/w block in the chip? If
> so, then this is fine. If the h/w blocks are different, then it would be
> better to go back to different compatible strings.

"thermal-diode", "thermistor", "voltage",  "local" - is one H/W block
(7.2.32 Mode Selection Register, 22h)
One of above "local" - is single input, enables by one bit EnLTD

 "vcore", "vcc" - another H/W block (7.2.35 Voltage Monitor Enable
Register, 25h), each of them is different input.

I'll divide them in the next patch.

>
>> +For sensors of types "thermal-diode", "thermistor" and "voltage" required
>> + - "reg": index in range 0 .. 2
>> +
>> +Except sensor at address 2 can't be "thermal-diode".
>> +
>> +Fan subnode:
>> +
>> +Required properties:
>> + - "reg" :index of in range 0 .. 2.
>
> What does the numbering correspond to in the h/w?
The numberring corresponds to the three different temperature/voltage
inputs (RTD1_MD, RTD2_MD, RTD3_MD) and three different fans (EnFan1,
EnFan2, EnFan3, EnDCFAN*, etc)

>> +     vcc {
>> +             compatible = "nuvoton,nct7802-sensor";
>> +             sensor-type = "vcc";
>
> No unit address?
>
>> +     };
>> +     vcore {
>> +             compatible = "nuvoton,nct7802-sensor";
>> +             sensor-type = "vcore";
>> +     };

There is only one vcc anv vcore input.


-- 
Thanks
Constantine
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: [PATCH v8] Documentation: add Device tree bindings for  hwmon/nct7802 Rob Herring <robh@kernel.org> - 2015-11-12 18:30 +0100
  Re: [PATCH v8] Documentation: add Device tree bindings for hwmon/nct7802 Constantine Shulyupin <const@makelinux.com> - 2015-11-14 20:40 +0100

csiph-web