Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1262829

Re: [PATCH V2 3/3] dma: add Qualcomm Technologies HIDMA channel driver

Show all headers | View raw

>> /*
>> * We are posting descriptors to the hardware as soon as
>> * they are ready, so this function does nothing.
>> */
>
> So, the Freescale driver was written before change went effective. I
> guess in 2011 DMA Engine drivers should use issue pending.
> Please, refactor since this behaviour is expected.
>

done

>>>> +/*
>>>> + * Submit descriptor to hardware.
>>>> + * Lock the PM for each descriptor we are sending.
>>>> + */
>>>> +static dma_cookie_t hidma_tx_submit(struct dma_async_tx_descriptor *txd)
>>>> +{
>>>> +       struct hidma_chan *mchan = to_hidma_chan(txd->chan);
>>>> +       struct hidma_dev *dmadev = mchan->dmadev;
>>>> +       struct hidma_desc *mdesc;
>>>> +       unsigned long irqflags;
>>>> +       dma_cookie_t cookie;
>>>> +
>>>> +       if (!hidma_ll_isenabled(dmadev->lldev))
>>>> +               return -ENODEV;
>>>> +
>>>> +       pm_runtime_get_sync(dmadev->ddev.dev);
>>>
>>>
>>> No point to do it here. It should be done on the function that
>>> actually starts the transfer (see issue pending).
>>>
>> comment above
>
> See above as well.

done

>
>>>> +static int hidma_probe(struct platform_device *pdev)
>>>> +{
>>>> +       struct hidma_dev *dmadev;
>>>> +       int rc = 0;
>>>> +       struct resource *trca_resource;
>>>> +       struct resource *evca_resource;
>>>> +       int chirq;
>>>> +       int current_channel_index = atomic_read(&channel_ref_count);
>>>> +
>
>>>> +       /* Set DMA mask to 64 bits. */
>>>> +       rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
>>>> +       if (rc) {
>>>> +               dev_warn(&pdev->dev, "unable to set coherent mask to
>>>> 64");
>>>> +               rc = dma_set_mask_and_coherent(&pdev->dev,
>>>> DMA_BIT_MASK(32));
>>>> +       }
>>>> +       if (rc)
>>>> +               goto dmafree;
>
> Maybe move these two lines inside previous condition?

ok

>
>>>> +
>>>> +       dmadev->lldev = hidma_ll_init(dmadev->ddev.dev,
>>>> +                               dmadev->nr_descriptors, dmadev->dev_trca,
>>>> +                               dmadev->dev_evca, dmadev->evridx);
>>>> +       if (!dmadev->lldev) {
>>>> +               rc = -EPROBE_DEFER;
>>>> +               goto dmafree;
>>>> +       }
>>>> +
>>>> +       rc = devm_request_irq(&pdev->dev, chirq, hidma_chirq_handler, 0,
>>>> +                             "qcom-hidma", &dmadev->lldev);
>>>
>>>
>>> Better to use request_irq().
>>>
>>
>> why? I thought we favored managed functions over standalone functions in
>> simplify the exit path.
>
> IRQ is slightly different in workflow. In most cases, unfortunately,
> there is no achievement by devm_ variant.
> At least I know two for now. One of them is DMA Engine slave drivers,
> though I didn't notice if you are using tasklet's here.
> Otherwise it's okay.
>
I'm keeping it as it is for maintenance reasons.

-- 
Sinan Kaya
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a 
Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: [PATCH V2 3/3] dma: add Qualcomm Technologies HIDMA channel  driver Sinan Kaya <okaya@codeaurora.org> - 2015-11-04 01:10 +0100
  Re: [PATCH V2 3/3] dma: add Qualcomm Technologies HIDMA channel driver Andy Shevchenko <andy.shevchenko@gmail.com> - 2015-11-04 18:50 +0100
    Re: [PATCH V2 3/3] dma: add Qualcomm Technologies HIDMA channel  driver Sinan Kaya <okaya@codeaurora.org> - 2015-11-05 03:30 +0100

csiph-web