Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1261242

Re: [PATCH v3 02/15] dax: increase granularity of dax_clear_blocks() operations

Show all headers | View raw

On Mon, Nov 2, 2015 at 9:52 PM, Dave Chinner <david@fromorbit.com> wrote:
> On Mon, Nov 02, 2015 at 09:31:11PM -0800, Dan Williams wrote:
>> On Mon, Nov 2, 2015 at 8:48 PM, Dave Chinner <david@fromorbit.com> wrote:
>> > On Mon, Nov 02, 2015 at 07:27:26PM -0800, Dan Williams wrote:
>> >> On Mon, Nov 2, 2015 at 4:51 PM, Dave Chinner <david@fromorbit.com> wrote:
>> >> > On Sun, Nov 01, 2015 at 11:29:53PM -0500, Dan Williams wrote:
>> >> > The zeroing (and the data, for that matter) doesn't need to be
>> >> > committed to persistent store until the allocation is written and
>> >> > committed to the journal - that will happen with a REQ_FLUSH|REQ_FUA
>> >> > write, so it makes sense to deploy the big hammer and delay the
>> >> > blocking CPU cache flushes until the last possible moment in cases
>> >> > like this.
>> >>
>> >> In pmem terms that would be a non-temporal memset plus a delayed
>> >> wmb_pmem at REQ_FLUSH time.  Better to write around the cache than
>> >> loop over the dirty-data issuing flushes after the fact.  We'll bump
>> >> the priority of the non-temporal memset implementation.
>> >
>> > Why is it better to do two synchronous physical writes to memory
>> > within a couple of microseconds of CPU time rather than writing them
>> > through the cache and, in most cases, only doing one physical write
>> > to memory in a separate context that expects to wait for a flush
>> > to complete?
>>
>> With a switch to non-temporal writes they wouldn't be synchronous,
>> although it's doubtful that the subsequent writes after zeroing would
>> also hit the store buffer.
>>
>> If we had a method to flush by physical-cache-way rather than a
>> virtual address then it would indeed be better to save up for one
>> final flush, but when we need to resort to looping through all the
>> virtual addresses that might have touched it gets expensive.
>
> msync() is for flushing userspace mmap ranges addresses back to
> physical memory. fsync() is for flushing kernel addresses (i.e. as
> returned by bdev_direct_access()) back to physical addresses.
> msync() calls ->fsync() as part of it's operation, fsync() does not
> care about whether mmap has been sync'd first or not.
>
> i.e. we don't care about random dirty userspace virtual mappings in
> fsync() - if you have them then you need to call msync() first. So
> we shouldn't ever be having to walk virtual addresses in fsync -
> just the kaddr returned by bdev_direct_access() is all that fsync
> needs to flush...
>

Neither Ross' solution nor mine use userspace addresses.  Which
comment of mine were you reacting to?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v3 02/15] dax: increase granularity of dax_clear_blocks()  operations Dan Williams <dan.j.williams@intel.com> - 2015-11-02 05:40 +0100
  Re: [PATCH v3 02/15] dax: increase granularity of dax_clear_blocks()  operations Dave Chinner <david@fromorbit.com> - 2015-11-03 02:00 +0100
    Re: [PATCH v3 02/15] dax: increase granularity of dax_clear_blocks() operations Dan Williams <dan.j.williams@intel.com> - 2015-11-03 04:30 +0100
      Re: [PATCH v3 02/15] dax: increase granularity of dax_clear_blocks()  operations Dave Chinner <david@fromorbit.com> - 2015-11-03 05:50 +0100
        Re: [PATCH v3 02/15] dax: increase granularity of dax_clear_blocks() operations Dan Williams <dan.j.williams@intel.com> - 2015-11-03 06:40 +0100
          Re: [PATCH v3 02/15] dax: increase granularity of dax_clear_blocks()  operations Dave Chinner <david@fromorbit.com> - 2015-11-03 07:00 +0100
            Re: [PATCH v3 02/15] dax: increase granularity of dax_clear_blocks() operations Dan Williams <dan.j.williams@intel.com> - 2015-11-03 08:30 +0100
          Re: [PATCH v3 02/15] dax: increase granularity of dax_clear_blocks()  operations Jan Kara <jack@suse.cz> - 2015-11-03 17:30 +0100
          Re: [PATCH v3 02/15] dax: increase granularity of dax_clear_blocks()  operations Ross Zwisler <ross.zwisler@linux.intel.com> - 2015-11-03 19:00 +0100
            Re: [PATCH v3 02/15] dax: increase granularity of dax_clear_blocks()  operations Dave Chinner <david@fromorbit.com> - 2015-11-03 22:10 +0100

csiph-web