Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1255296

Re: [PATCH-v5 RESEND 3/5] i2c: pxa: Add support for pxa910/988 & new configuration features

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

On Mon, Aug 24, 2015 at 11:29:36AM +0530, Vaibhav Hiremath wrote:
> TWSI_ILCR & TWSI_IWCR registers are used to adjust clock rate
> of standard & fast mode in pxa910/988; so this patch adds these two new
> entries to "struct pxa_reg_layout" and "struct pxa_i2c".
> 
> As discussed in the previous patch-series, the idea here is to add standard
> DT properties for ilcr and iwcr configuration fields.
> In case of Master ilcr is used for low/high time and in case of slave mode
> of operation iwcr is used for setup/hold time.
> 
> Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
> Signed-off-by: Yi Zhang <yizhang@marvell.com>
> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>

Fixed this checkpatch warning:

CHECK: Please don't use multiple blank lines
#82: FILE: drivers/i2c/busses/i2c-pxa.c:157:
+
+

and applied to for-next, thanks!

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH-v5 RESEND 3/5] i2c: pxa: Add support for pxa910/988 & new  configuration features Wolfram Sang <wsa@the-dreams.de> - 2015-10-25 09:30 +0100

csiph-web