Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1253321
| From | Rob Herring <robh@kernel.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v4 1/6] remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver |
| Date | 2015-10-22 00:50 +0200 |
| Message-ID | <qmamJ-8tQ-5@gated-at.bofh.it> (permalink) |
| References | <qm042-1Rq-17@gated-at.bofh.it> <qm0dI-22V-21@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On Wed, Oct 21, 2015 at 6:47 AM, Lee Jones <lee.jones@linaro.org> wrote:
> Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Are all the instances the same or are some fixed to audio processing
for example? If the latter, I think the compatible strings should
reflect the function. If the former, then:
Acked-by: Rob Herring <robh@kernel.org>
Rob
> ---
> .../devicetree/bindings/remoteproc/st-rproc.txt | 41 ++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/st-rproc.txt
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/st-rproc.txt b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
> new file mode 100644
> index 0000000..1031bcd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
> @@ -0,0 +1,41 @@
> +STMicroelectronics Co-Processor Bindings
> +----------------------------------------
> +
> +This binding provides support for adjunct processors found on ST SoCs.
> +
> +Co-processors can be controlled from the bootloader or the primary OS. If
> +the bootloader starts a co-processor, the primary OS must detect its state
> +and act accordingly.
> +
> +Required properties:
> +- compatible Should be one of:
> + "st,st231-rproc"
> + "st,st40-rproc"
> +- memory-region Reserved memory (See: ../reserved-memory/reserved-memory.txt)
> +- resets Reset lines (See: ../reset/reset.txt)
> +- reset-names Must be "sw_reset" and "pwr_reset"
> +- clocks Clock for co-processor (See: ../clock/clock-bindings.txt)
> +- clock-frequency Clock frequency to set co-processor at if the bootloader
> + hasn't already done so
> +- st,syscfg System configuration register which holds the boot vector
> + for the co-processor
> + 1st cell: Phandle to syscon block
> + 2nd cell: Boot vector register offset
> +
> +Example:
> +
> + audio_reserved: rproc@42000000 {
> + compatible = "shared-dma-pool";
> + reg = <0x42000000 0x01000000>;
> + no-map;
> + };
> +
> + st231-audio {
> + compatible = "st,st231-rproc";
> + memory-region = <&audio_reserved>;
> + resets = <&softreset STIH407_ST231_AUD_SOFTRESET>;
> + reset-names = "sw_reset";
> + clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>;
> + clock-frequency = <600000000>;
> + st,syscfg = <&syscfg_core 0x228>;
> + };
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread
[PATCH v4 0/6] remoteproc: Add driver for STMicroelectronics platforms Lee Jones <lee.jones@linaro.org> - 2015-10-21 14:00 +0200
[PATCH v4 4/6] MAINTAINERS: Add ST's Remote Processor Driver to ARM/STI ARCHITECTURE Lee Jones <lee.jones@linaro.org> - 2015-10-21 14:00 +0200
[PATCH v4 1/6] remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver Lee Jones <lee.jones@linaro.org> - 2015-10-21 14:00 +0200
Re: [PATCH v4 1/6] remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver Rob Herring <robh@kernel.org> - 2015-10-22 00:50 +0200
csiph-web