Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1250451

RE: [PATCH v4 2/3] phy: rcar-gen3-usb2: change the mode to OTG on the combined channel

Show key headers only | View raw

Hi,

> Sent: Saturday, October 17, 2015 10:48 AM
> 
> Hi,
> 
> On Tuesday 13 October 2015 03:52 PM, Yoshihiro Shimoda wrote:
> > To use the channel 0 of R-Car gen3 as periperal mode, This patch changes
> > the mode to OTG instead of HOST. Then, this driver needs to set some
> > registers to enable host mode and detects ID pin and VBUS pin at
> > phy_init() timing.
> >
> > For now, the channel 0 can be used as host mode only.
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> > ---
> >  drivers/phy/phy-rcar-gen3-usb2.c | 126 ++++++++++++++++++++++++++++++++++++++-
> >  1 file changed, 124 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
> > index d90dfcf..03d7079 100644
> > --- a/drivers/phy/phy-rcar-gen3-usb2.c
> > +++ b/drivers/phy/phy-rcar-gen3-usb2.c
> > @@ -25,6 +25,10 @@
> >  #define USB2_USBCTR		0x00c
> >  #define USB2_SPD_RSM_TIMSET	0x10c
> >  #define USB2_OC_TIMSET		0x110
> > +#define USB2_COMMCTRL		0x600
> > +#define USB2_VBCTRL		0x60c
> > +#define USB2_LINECTRL1		0x610
> > +#define USB2_ADPCTRL		0x630
> >
> >  /* INT_ENABLE */
> >  #define USB2_INT_ENABLE_USBH_INTB_EN	BIT(2)
> > @@ -42,6 +46,24 @@
> >  /* OC_TIMSET */
> >  #define USB2_OC_TIMSET_INIT		0x000209ab
> >
> > +/* COMMCTRL */
> > +#define USB2_COMMCTRL_OTG_PERI		BIT(31)	/* 1 = Peripheral mode */
> > +
> > +/* VBCTRL */
> > +#define USB2_VBCTRL_DRVVBUSSEL		BIT(8)
> > +
> > +/* LINECTRL1 */
> > +#define USB2_LINECTRL1_DPRPD_EN		BIT(19)
> > +#define USB2_LINECTRL1_DP_RPD		BIT(18)
> > +#define USB2_LINECTRL1_DMRPD_EN		BIT(17)
> > +#define USB2_LINECTRL1_DM_RPD		BIT(16)
> > +
> > +/* ADPCTRL */
> > +#define USB2_ADPCTRL_OTGSESSVLD		BIT(20)
> > +#define USB2_ADPCTRL_IDDIG		BIT(19)
> > +#define USB2_ADPCTRL_IDPULLUP		BIT(5)	/* 1 = ID sampling is enabled */
> > +#define USB2_ADPCTRL_DRVVBUS		BIT(4)
> > +
> >  /******* HSUSB registers (original offset is +0x100) *******/
> >  #define HSUSB_LPSTS			0x02
> >  #define HSUSB_UGCTRL2			0x84
> > @@ -68,6 +90,104 @@ struct rcar_gen3_chan {
> >  	spinlock_t lock;
> >  };
> >
> > +static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
> > +{
> > +	void __iomem *usb2_base = ch->usb2.base;
> > +	u32 tmp = readl(usb2_base + USB2_COMMCTRL);
> 
> It's your preference but I'd like to have something like val instead of tmp.

I got it. I will change the name.

> > +
> > +	dev_dbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, tmp, host);
> 
> This shoulod be dev_vdbg.

I got it. I will fix it.

> > +	if (host)
> > +		tmp &= ~USB2_COMMCTRL_OTG_PERI;
> > +	else
> > +		tmp |= USB2_COMMCTRL_OTG_PERI;
> > +	writel(tmp, usb2_base + USB2_COMMCTRL);
> > +}
> > +
> > +static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
> > +{
> > +	void __iomem *usb2_base = ch->usb2.base;
> > +	u32 tmp = readl(usb2_base + USB2_LINECTRL1);
> > +
> > +	dev_dbg(&ch->phy->dev, "%s: %08x, %d, %d\n", __func__, tmp, dp, dm);
> 
> same here.

I got it.

> > +	tmp &= ~(USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD);
> > +	if (dp)
> > +		tmp |= USB2_LINECTRL1_DP_RPD;
> > +	if (dm)
> > +		tmp |= USB2_LINECTRL1_DM_RPD;
> > +	writel(tmp, usb2_base + USB2_LINECTRL1);
> > +}
> > +
> > +static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
> > +{
> > +	void __iomem *usb2_base = ch->usb2.base;
> > +	u32 tmp = readl(usb2_base + USB2_ADPCTRL);
> > +
> > +	dev_dbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, tmp, vbus);
> 
> here too.

I will fix it.

> > +	if (vbus)
> > +		tmp |= USB2_ADPCTRL_DRVVBUS;
> > +	else
> > +		tmp &= ~USB2_ADPCTRL_DRVVBUS;
> > +	writel(tmp, usb2_base + USB2_ADPCTRL);
> > +}
> > +
> > +static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch)
> > +{
> > +	rcar_gen3_set_linectrl(ch, 1, 1);
> > +	rcar_gen3_set_host_mode(ch, 1);
> > +	rcar_gen3_enable_vbus_ctrl(ch, 1);
> > +}
> > +
> > +static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
> > +{
> > +	rcar_gen3_set_linectrl(ch, 0, 1);
> > +	rcar_gen3_set_host_mode(ch, 0);
> > +	rcar_gen3_enable_vbus_ctrl(ch, 0);
> > +}
> > +
> > +static bool rcar_gen3_check_vbus(struct rcar_gen3_chan *ch)
> > +{
> > +	return !!(readl(ch->usb2.base + USB2_ADPCTRL) &
> > +		  USB2_ADPCTRL_OTGSESSVLD);
> > +}
> > +
> > +static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
> > +{
> > +	return !!(readl(ch->usb2.base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
> > +}
> > +
> > +static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
> > +{
> > +	bool is_host = true;
> > +
> > +	if (rcar_gen3_check_id(ch)) {
> > +		/* B-device? */
> > +		if (rcar_gen3_check_vbus(ch))
> 
> This can be rcar_gen3_check_id(ch) && rcar_gen3_check_vbus(ch) no?

Thank you for the point. I will change such a condition.

Best regards,
Yoshihiro Shimoda

> Thanks
> Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v4 0/3] phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> - 2015-10-13 12:30 +0200
  Re: [PATCH v4 1/3] phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY  driver Kishon Vijay Abraham I <kishon@ti.com> - 2015-10-17 03:50 +0200
    RE: [PATCH v4 1/3] phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY  driver Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> - 2015-10-19 10:40 +0200
  Re: [PATCH v4 2/3] phy: rcar-gen3-usb2: change the mode to OTG on the  combined channel Kishon Vijay Abraham I <kishon@ti.com> - 2015-10-17 03:50 +0200
    RE: [PATCH v4 2/3] phy: rcar-gen3-usb2: change the mode to OTG on the  combined channel Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> - 2015-10-19 10:40 +0200
    Re: [PATCH v4 2/3] phy: rcar-gen3-usb2: change the mode to OTG on  the combined channel Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com> - 2015-10-19 14:00 +0200
  Re: [PATCH v4 3/3] phy: rcar-gen3-usb2: add runtime ID/VBUS pin  detection Kishon Vijay Abraham I <kishon@ti.com> - 2015-10-17 04:00 +0200
    RE: [PATCH v4 3/3] phy: rcar-gen3-usb2: add runtime ID/VBUS pin  detection Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> - 2015-10-19 10:40 +0200

csiph-web