Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1245374

Re: [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes

From Roger Quadros <rogerq@ti.com>
Newsgroups linux.kernel
Subject Re: [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes
Date 2015-10-13 08:40 +0200
Message-ID <qj1pD-6O2-3@gated-at.bofh.it> (permalink)
References <qa5iO-5JO-13@gated-at.bofh.it> <qa5iR-5JO-75@gated-at.bofh.it> <qiVWW-7ai-3@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


On 13/10/15 03:43, Tony Lindgren wrote:
> * Roger Quadros <rogerq@ti.com> [150918 08:00]:
>> Add compatible id, GPMC register resource and interrupt
>> resource to NAND controller nodes.
>>
>> The GPMC driver now implements gpiochip and irqchip so
>> enable gpio-controller and interrupt-controller properties.
>>
>> With this the interrupt parent of NAND node changes so fix it
>> accordingly.
> ...
>> --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
>> +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
>> @@ -35,11 +35,14 @@
>>  };
>>  
>>  &gpmc {
>> -	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
>> +	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
>>  
>>  	nand@0,0 {
>> -		linux,mtd-name = "micron,mt29f4g16abbda3w";
>> +		compatible = "ti,omap2-nand";
>>  		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
>> +		interrupt-parent = <&intc>;
>> +		interrupts = <20>;
>> +		linux,mtd-name = "micron,mt29f4g16abbda3w";
>>  		nand-bus-width = <16>;
>>  		ti,nand-ecc-opt = "bch8";
>>  		gpmc,sync-clk-ps = <0>;
> 
> At least torpedo breaks for NFSroot as NAND now overlaps with
> Ethernet.. What's the policy you have for moving the addresses
> around?

For OMAP3 I intended to use 0x30000000 for NAND but incorrectly
used 0x08000000 for the torpedo.

Does setting it to 0x30000000 work? If not what is the original
NAND address for this board?

> 
> There may be other similar cases to check too.

Just checked that all other OMAP3 boards I've set to 0x30000000
if they were 0x0.

cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

Re: [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes Tony Lindgren <tony@atomide.com> - 2015-10-13 02:50 +0200
  Re: [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes Roger Quadros <rogerq@ti.com> - 2015-10-13 08:40 +0200
    Re: [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes Tony Lindgren <tony@atomide.com> - 2015-10-13 17:20 +0200
      Re: [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes Roger Quadros <rogerq@ti.com> - 2015-10-14 09:50 +0200

csiph-web