Re: [PATCH v7 3/5] ARM: berlin: add a PWM node on the BG2Q

From	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH v7 3/5] ARM: berlin: add a PWM node on the BG2Q
Date	2015-10-05 20:30 +0200
Message-ID	<qgiGm-6S2-21@gated-at.bofh.it> (permalink)
References	<qfa8a-6Wx-9@gated-at.bofh.it> <qfa8a-6Wx-13@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On 02.10.2015 16:59, Antoine Tenart wrote:
> This patch adds a PWM node in the Berlin BG2Q device tree, using the
> newly added Berlin PWM driver.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
> ---
>   arch/arm/boot/dts/berlin2q.dtsi | 7 +++++++
>   1 file changed, 7 insertions(+)

Applied this and the next two for BG2 and BG2CD
to berlin/dt.

Thanks,
   Sebastian

> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
> index 63a48490e2f9..5bfa71a87617 100644
> --- a/arch/arm/boot/dts/berlin2q.dtsi
> +++ b/arch/arm/boot/dts/berlin2q.dtsi
> @@ -477,6 +477,13 @@
>   			status = "disabled";
>   		};
>
> +		pwm: pwm@f20000 {
> +			compatible = "marvell,berlin-pwm";
> +			reg = <0xf20000 0x40>;
> +			clocks = <&chip_clk CLKID_CFG>;
> +			#pwm-cells = <3>;
> +		};
> +
>   		apb@fc0000 {
>   			compatible = "simple-bus";
>   			#address-cells = <1>;
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v7 3/5] ARM: berlin: add a PWM node on the BG2Q Antoine Tenart <antoine.tenart@free-electrons.com> - 2015-10-02 17:10 +0200
  Re: [PATCH v7 3/5] ARM: berlin: add a PWM node on the BG2Q Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> - 2015-10-05 20:30 +0200

csiph-web