Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1241546

Re: [RFT 0/3] usb: usb3503: Fix probing on Arndale board (missing phy)

Show all headers | View raw

Hello,

On 2015-10-07 02:30, Krzysztof Kozlowski wrote:
> Introduction
> ============
> This patchset tries to fix probing of usb3503 on Arndale board
> if the Samsung PHY driver is probed later (or built as a module).
>
> *The patchset was not tested on Arndale board.*
> I don't have that board. Please test it and say if the usb3503 deferred probe
> works fine and the issue is solved.
>
> The patchset was tested on Odroid U3 board (which is different!)
> in a simulated environment. It is not sufficient testing.
>
>
> Difference
> ==========
> The usb3503 device driver can be used as a I2C device (on Odroid U3)
> or as a platform device connected through phy (on Arndale). In the second
> case the necessary phy reference has to be obtained and enabled.
>
> For some details please look also at thread [0][1].
>
> [0] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-June/348524.html
> [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-June/348875.html
>

I'm not sure that this is the correct approach. usb3503 chip is simply 
connected
to Exynos USB2 phy, so it visible on the USB bus. The real driver that 
controls USB2
PHY is Exynos EHCI driver and USB3503 should not mess around it.

In my opinion all that is needed in case of Arndale board is forcing 
reset of
usb3503 chip after successful EHCI and USB2 PHY initialization (for some 
reason
initialization of usb3503 chip must be done after usb host initialization).
However I have no idea which driver should trigger this reset. Right now 
I didn't
find any good solution for additional control for devices which are on 
autoprobed
bus like usb.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[RFT 0/3] usb: usb3503: Fix probing on Arndale board (missing phy) Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2015-10-07 02:40 +0200
  [RFT 3/3] ARM: dts: Fix usb3503 probe by enabling phy on  exynos5250-arndale Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2015-10-07 02:40 +0200
  Re: [RFT 0/3] usb: usb3503: Fix probing on Arndale board (missing phy) Marek Szyprowski <m.szyprowski@samsung.com> - 2015-10-07 16:30 +0200
    Re: [RFT 0/3] usb: usb3503: Fix probing on Arndale board (missing phy) Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2015-10-08 08:10 +0200
      Re: [RFT 0/3] usb: usb3503: Fix probing on Arndale board (missing phy) Marek Szyprowski <m.szyprowski@samsung.com> - 2015-10-08 08:30 +0200
        Re: [RFT 0/3] usb: usb3503: Fix probing on Arndale board (missing  phy) Javier Martinez Canillas <javier@osg.samsung.com> - 2015-10-08 11:40 +0200
          Re: [RFT 0/3] usb: usb3503: Fix probing on Arndale board (missing phy) Marek Szyprowski <m.szyprowski@samsung.com> - 2015-10-08 12:00 +0200
  Re: [RFT 0/3] usb: usb3503: Fix probing on Arndale board (missing phy) Kevin Hilman <khilman@kernel.org> - 2015-10-09 21:20 +0200
    Re: [RFT 0/3] usb: usb3503: Fix probing on Arndale board (missing  phy) Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2015-10-10 05:10 +0200

csiph-web