[PATCH 5/5] ARM: dts: Use GPIO constants for flags cells in exynos5440 boards

From	Javier Martinez Canillas <javier@osg.samsung.com>
Newsgroups	linux.kernel
Subject	[PATCH 5/5] ARM: dts: Use GPIO constants for flags cells in exynos5440 boards
Date	2015-10-07 15:20 +0200
Message-ID	<qgWNr-5TU-5@gated-at.bofh.it> (permalink)
References	<qgWNr-5TU-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

The board DTS are using numeric values instead of the defined GPIO
constanst to express polarity, use them to make the DTS more clear.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

 arch/arm/boot/dts/exynos5440-ssdk5440.dts | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index e4443f4e6572..6a0d802e87c8 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "exynos5440.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
@@ -29,12 +30,12 @@
 };
 
 &pcie_0 {
-	reset-gpio = <&pin_ctrl 5 0>;
+	reset-gpio = <&pin_ctrl 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &pcie_1 {
-	reset-gpio = <&pin_ctrl 22 0>;
+	reset-gpio = <&pin_ctrl 22 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH 5/5] ARM: dts: Use GPIO constants for flags cells in exynos5440 boards Javier Martinez Canillas <javier@osg.samsung.com> - 2015-10-07 15:20 +0200

csiph-web