Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1240712

Re: [PATCH v2 01/25] powerpc/8xx: Save r3 all the time in DTLB miss handler

Show all headers | View raw

On Tue, 2015-10-06 at 15:35 +0200, Christophe Leroy wrote:
> Le 29/09/2015 00:07, Scott Wood a écrit :
> > On Tue, Sep 22, 2015 at 06:50:29PM +0200, Christophe Leroy wrote:
> > > We are spending between 40 and 160 cycles with a mean of 65 cycles in
> > > the TLB handling routines (measured with mftbl) so make it more
> > > simple althought it adds one instruction.
> > > 
> > > Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> > Does this just make it simpler or does it make it faster?  What is the
> > performance impact?  Is the performance impact seen with or without
> > CONFIG_8xx_CPU6 enabled?  Without it, it looks like you're adding an
> > mtspr/mfspr combo in order to replace one mfspr.
> > 
> > 
> The performance impact is not noticeable. Theoritically it adds 1 cycle 
> on a mean of 65 cycles, that is 1.5%. Even in the worst case where we 
> spend around 10% of the time in TLB handling exceptions, that represents 
> only 0.15% of the total CPU time. So that's almost nothing.
> Behind the fact to get in simpler, the main reason is because I need a 
> third register for the following patch in the set, otherwise I would 
> spend a more time saving and restoring CR several times.

FWIW, the added instruction is an SPR access and I doubt that's only one 
cycle.

-Scott


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH v2 01/25] powerpc/8xx: Save r3 all the time in DTLB miss  handler Christophe Leroy <christophe.leroy@c-s.fr> - 2015-10-06 15:40 +0200
  Re: [PATCH v2 01/25] powerpc/8xx: Save r3 all the time in DTLB miss  handler Scott Wood <scottwood@freescale.com> - 2015-10-06 18:50 +0200
  Re: [PATCH v2 01/25] powerpc/8xx: Save r3 all the time in DTLB miss  handler Scott Wood <scottwood@freescale.com> - 2015-10-06 18:50 +0200
    Re: [PATCH v2 01/25] powerpc/8xx: Save r3 all the time in DTLB miss  handler Scott Wood <scottwood@freescale.com> - 2015-10-06 22:40 +0200
    Re: [PATCH v2 01/25] powerpc/8xx: Save r3 all the time in DTLB miss  handler christophe leroy <christophe.leroy@c-s.fr> - 2015-10-06 22:40 +0200

csiph-web