Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler

From	Grygorii Strashko <grygorii.strashko@ti.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler
Date	2015-10-03 00:50 +0200
Message-ID	<qfhjk-de-9@gated-at.bofh.it> (permalink)
References	<qcGQW-2j5-7@gated-at.bofh.it> <qcGQW-2j5-5@gated-at.bofh.it> <qfeYb-5qP-25@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On 10/02/2015 03:17 PM, Linus Walleij wrote:
> On Fri, Sep 25, 2015 at 12:28 PM, Grygorii Strashko
> <grygorii.strashko@ti.com> wrote:
>
>> This patch converts TI OMAP GPIO driver to use generic irq handler
>> instead of chained IRQ handler. This way OMAP GPIO driver will be
>> compatible with RT kernel where it will be forced thread IRQ handler
>> while in non-RT kernel it still will be executed in HW IRQ context.
>> As part of this change the IRQ wakeup configuration is applied to
>> GPIO Bank IRQ as it now will be under control of IRQ PM Core during
>> suspend.
>>
>> There are also additional benefits:
>>   - on-RT kernel there will be no complains any more about PM runtime usage
>>     in atomic context  "BUG: sleeping function called from invalid context";
>>   - GPIO bank IRQs will appear in /proc/interrupts and its usage statistic
>>      will be  visible;
>>   - GPIO bank IRQs could be configured through IRQ proc_fs interface and,
>>     as result, could be a part of IRQ balancing process if needed;
>>   - GPIO bank IRQs will be under control of IRQ PM Core during
>>     suspend to RAM.
>>
>> Disadvantage:
>>   - additional runtime overhed as call chain till
>>     omap_gpio_irq_handler() will be longer now
>>   - necessity to use wa_lock in omap_gpio_irq_handler() to W/A warning
>>     in handle_irq_event_percpu()
>>     WARNING: CPU: 1 PID: 35 at kernel/irq/handle.c:149 handle_irq_event_percpu+0x51c/0x638()
>>
>> This patch doesn't fully follows recommendations provided by Sebastian
>> Andrzej Siewior [1], because It's required to go through and check all
>> GPIO IRQ pin states as fast as possible and pass control to handle_level_irq
>> or handle_edge_irq. handle_level_irq or handle_edge_irq will perform actions
>> specific for IRQ triggering type and wakeup corresponding registered
>> threaded IRQ handler (at least it's expected to be threaded).
>> IRQs can be lost if handle_nested_irq() will be used, because excecution
>> time of some pin specific GPIO IRQ handler can be very significant and
>> require accessing ext. devices (I2C).
>>
>> Idea of such kind reworking was also discussed in [2].
>>
>> [1] http://www.spinics.net/lists/linux-omap/msg120665.html
>> [2] http://www.spinics.net/lists/linux-omap/msg119516.html
>>
>> Tested-by: Tony Lindgren <tony@atomide.com>
>> Tested-by: Austin Schuh <austin@peloton-tech.com>
>> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
>
> Patch applied.
>

Thanks.

> I'm thinking that we need some recommendations on how to write
> IRQ handlers in order to be RT-compatible. Can you help me lining
> up the requirements in Documentation/gpio/driver.txt?
>
> I will write an RFC patch and let you write some additional text
> to it in response then we can iterate it a bit.

Sure. I'll try to help.


-- 
regards,
-grygorii
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH 2/2] gpio: omap: convert to use generic irq handler Grygorii Strashko <grygorii.strashko@ti.com> - 2015-09-25 21:30 +0200
  Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler Linus Walleij <linus.walleij@linaro.org> - 2015-10-02 22:20 +0200
    Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler Grygorii Strashko <grygorii.strashko@ti.com> - 2015-10-03 00:50 +0200

csiph-web