Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1236333

Re: [RFC] regulator: Propagate voltage changes to supply regulators

Show all headers | View raw

Please do not answer to this series, it contains a wrong address for the
linux-arm-kernel list. I just resent this with the correct addres. Sorry
for the noise.

Sascha

On Wed, Sep 30, 2015 at 03:57:48PM +0200, Sascha Hauer wrote:
> Until now changing the voltage of a regulator only ever effected the
> regulator itself, but never its supplies. It's a common pattern though
> to put LDO regulators behind switching regulators. The switching
> regulators efficiently drop the input voltage but have a high ripple on
> their output. The output is then cleaned up by the LDOs. For higher
> energy efficiency the voltage drop at the LDOs should be minimized. This
> patch adds support for such a scenario.
> 
> A new min_dropout_uv field is added to struct regulator_desc. Regulators
> can specify the minimun dropout voltage they need for proper function
> here. Now when the voltage is changed on a regulator the regulator core
> makes sure that
> a) before increasing the voltage on the current regulator the supply
>    provides at least the desired voltage plus the minimum dropout
> b) after decreasing the voltage on the current regulator the supply
>    is optimized to the minimum required voltage within the needs of
>    the consumers of the supply.
> 
> Calculating the optimum voltage for the supply regulator is a bit tricky
> since the simple approach of just adding the desired minimum voltage and
> the minimum dropout is not enough. It may happen that the current
> regulator does not support the desired minimum voltage, but only a
> higher one. This means we have to figure out the lowest voltage
> supported by the regulator that is higher than the minimum desired
> voltage. The regulator_get_voltage_floor introduced with this series
> does
> exactly that.
> 
> This is a first RFC for this series which probably has some rough edges,
> but it was already tested successfully on a Phytec PFLA02 i.MX6 board.
> 
> Please review, any input welcome.
> 
> Sascha
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[RFC] regulator: Propagate voltage changes to supply regulators Sascha Hauer <s.hauer@pengutronix.de> - 2015-09-30 16:00 +0200
  Re: [RFC] regulator: Propagate voltage changes to supply regulators Sascha Hauer <s.hauer@pengutronix.de> - 2015-09-30 16:10 +0200

csiph-web