Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1236094

[PATCH 3/3] serial: amba-pl011: add ACPI support to AMBA probe

From Graeme Gregory <graeme.gregory@linaro.org>
Newsgroups linux.kernel
Subject [PATCH 3/3] serial: amba-pl011: add ACPI support to AMBA probe
Date 2015-09-30 12:40 +0200
Message-ID <qemXN-2nj-31@gated-at.bofh.it> (permalink)
References <qemXM-2nj-5@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


In ACPI this device is only defined in SBSA mode so
if we are probing from ACPI use this mode.

Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
---
 drivers/tty/serial/amba-pl011.c | 32 +++++++++++++++++++++-----------
 1 file changed, 21 insertions(+), 11 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index fd27e98..55209aa 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2368,18 +2368,28 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	if (!uap)
 		return -ENOMEM;
 
-	uap->clk = devm_clk_get(&dev->dev, NULL);
-	if (IS_ERR(uap->clk))
-		return PTR_ERR(uap->clk);
-
-	uap->vendor = vendor;
-	uap->lcrh_rx = vendor->lcrh_rx;
-	uap->lcrh_tx = vendor->lcrh_tx;
-	uap->fifosize = vendor->get_fifosize(dev);
+	/* ACPI only defines SBSA variant */
+	if (!ACPI_COMPANION(&dev->dev)) {
+		uap->clk = devm_clk_get(&dev->dev, NULL);
+		if (IS_ERR(uap->clk))
+			return PTR_ERR(uap->clk);
+
+		uap->vendor = vendor;
+		uap->lcrh_rx = vendor->lcrh_rx;
+		uap->lcrh_tx = vendor->lcrh_tx;
+		uap->fifosize = vendor->get_fifosize(dev);
+		uap->port.ops = &amba_pl011_pops;
+		snprintf(uap->type, sizeof(uap->type), "PL011 rev%u",
+				amba_rev(dev));
+	 } else {
+		uap->vendor	= &vendor_sbsa;
+		uap->fifosize	= 32;
+		uap->port.ops	= &sbsa_uart_pops;
+		uap->fixed_baud = 115200;
+
+		snprintf(uap->type, sizeof(uap->type), "SBSA");
+	}
 	uap->port.irq = dev->irq[0];
-	uap->port.ops = &amba_pl011_pops;
-
-	snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
 
 	ret = pl011_setup_port(&dev->dev, uap, &dev->res, portnr);
 	if (ret)
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next | Find similar | Unroll thread


Thread

[PATCH 3/3] serial: amba-pl011: add ACPI support to AMBA probe Graeme Gregory <graeme.gregory@linaro.org> - 2015-09-30 12:40 +0200

csiph-web