Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1237249

Re: [PATCH] thermal: avoid division by zero in power allocator

Show all headers | View raw

On Tue, Sep 29, 2015 at 09:33:30PM +0100, Andrew Morton wrote:
> On Mon, 28 Sep 2015 23:28:34 +0200 Andrea Arcangeli <aarcange@redhat.com> wrote:
> 
> > During boot I get a div by zero Oops regression starting in v4.3-rc3.
> > 
> > ...
> >
> > --- a/drivers/thermal/power_allocator.c
> > +++ b/drivers/thermal/power_allocator.c
> > @@ -144,6 +144,16 @@ static void estimate_pid_constants(struct thermal_zone_device *tz,
> >  		switch_on_temp = 0;
> >  
> >  	temperature_threshold = control_temp - switch_on_temp;
> > +	/*
> > +	 * estimate_pid_constants() tries to find appropriate default
> > +	 * values for thermal zones that don't provide them. If a
> > +	 * system integrator has configured a thermal zone with two
> > +	 * passive trip points at the same temperature, that person
> > +	 * hasn't put any effort to set up the thermal zone properly
> > +	 * so just give up.
> > +	 */
> > +	if (!temperature_threshold)
> > +		return;
> >  
> >  	if (!tz->tzp->k_po || force)
> >  		tz->tzp->k_po = int_to_frac(sustainable_power) /
> 
> a) Are we sure this won't leave tz->tzp fields uninitialized?

They will be all zeros.  That's good enough.

> b) I'm not understanding that code at all.  The "proportional" term
>    in a PID controller is supposed to be proportional to the (desired -
>    actual) difference (aka "the error").
> 
>    But estimate_pid_constants() appears to be setting the
>    "proportional" term to be proportional to 1/error!

estimate_pid_constants() calculate the constants that you use in the
PID algorithm.  Say:

k_p * error + k_i * integral_of_error + k_d * diff_of_error

This code is calculating a reasonable k_p, k_i and k_d when they are
not provided by the platform.

>    Maybe a description of local `temperature_threshold' would help
>    clue me in.

The `error' in the above definition is:

target_temperature - current_temperature

whereas `temperature_threshold' is:

`target_temperature' - `switch_on_temperature'

`switch_on_temperature' is the temperature above which the thermal
governor starts operating and throttling cpus (or whatever cooling
device is configured).

The `switch_on_temperature' and `target_temperature' are defined using
trip points.  A platform that sets two trip points to the same
temperature is not properly configured.  With Andrea's patch we
provide degraded behavior instead of crashing.  I agree with that
approach (hence my Reviewed-by, maybe it should be an Acked-by?).

Cheers,
Javi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH] thermal: avoid division by zero in power allocator Andrea Arcangeli <aarcange@redhat.com> - 2015-09-28 23:30 +0200
  Re: [PATCH] thermal: avoid division by zero in power allocator Andrew Morton <akpm@linux-foundation.org> - 2015-09-29 22:40 +0200
    Re: [PATCH] thermal: avoid division by zero in power allocator Javi Merino <javi.merino@arm.com> - 2015-10-01 12:20 +0200

csiph-web