Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1230054

Re: [PATCH 2/5] Documentation: leds: Add description of brightness setting API

Show all headers | View raw

Hi Jacek,

Jacek Anaszewski wrote:
> This patch adds description of the LED subsystem API for
> setting an LED brightness.
> 
> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
> ---
>  Documentation/leds/leds-class.txt |   21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt
> index 62261c0..2cc38fa 100644
> --- a/Documentation/leds/leds-class.txt
> +++ b/Documentation/leds/leds-class.txt
> @@ -52,6 +52,27 @@ above leaves scope for further attributes should they be needed. If sections
>  of the name don't apply, just leave that section blank.
>  
>  
> +Brightness setting API
> +======================
> +
> +LED subsystem core exposes following API for setting brightness:
> +
> +    - led_set_brightness : if necessary, cancels the software blink timer that
> +		implements blinking when the hardware doesn't; it is guaranteed
> +		not to sleep, which implies the possibility of delegating the
> +		job to a work queue task (uses led_set_brightness_nosleep
> +		underneath - see below),
> +    - led_set_brightness_sync : for use cases when immediate effect is desired;
> +		it can block the caller for the time required for accessing
> +		device registers and can sleep,
> +    - led_set_brightness_nosleep : sets an LEDs brightness using either
> +		brightness_set op, which is guaranteed not to sleep, or, if only
> +		brightness_set_blocking op is available, delegates it to a work
> +		queue task; this API is inteded for use by LED core and
> +		led-triggers, as they can be called from atomic context, and thus
> +		cannot sleep.

led_set_brightness_nosleep() isn't part of the API intended to be used
outside the LED framework --- I wouldn't document it here, only the part
relevant for users outside the LED class and triggers frameworks.

> +
> +
>  Hardware accelerated blink of LEDs
>  ==================================
>  
> 


-- 
Kind regards,

Sakari Ailus
sakari.ailus@linux.intel.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH 2/5] Documentation: leds: Add description of brightness setting  API Jacek Anaszewski <j.anaszewski@samsung.com> - 2015-09-21 16:40 +0200
  Re: [PATCH 2/5] Documentation: leds: Add description of brightness  setting API Sakari Ailus <sakari.ailus@linux.intel.com> - 2015-09-22 12:30 +0200
    Re: [PATCH 2/5] Documentation: leds: Add description of brightness  setting API Jacek Anaszewski <j.anaszewski@samsung.com> - 2015-09-22 13:10 +0200
  Re: [PATCH 2/5] Documentation: leds: Add description of brightness  setting API Andrew Lunn <andrew@lunn.ch> - 2015-09-22 21:40 +0200
    Re: [PATCH 2/5] Documentation: leds: Add description of brightness  setting API Jacek Anaszewski <j.anaszewski@samsung.com> - 2015-09-23 11:30 +0200

csiph-web