Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1227729

[PATCH 5/7] net: fix phy refcounting in a bunch of drivers

From Russell King <rmk+kernel@arm.linux.org.uk>
Newsgroups linux.kernel
Subject [PATCH 5/7] net: fix phy refcounting in a bunch of drivers
Date 2015-09-18 12:00 +0200
Message-ID <qa0Cu-7v5-15@gated-at.bofh.it> (permalink)
References <qa0sO-7jM-21@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw

of_phy_find_device() increments the phy struct device refcount,
which we need to properly balance.  Add code to network drivers
using this function to ensure that the struct device refcount is
correctly balanced.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/net/ethernet/apm/xgene/xgene_enet_hw.c    | 23 +++++++++++++++--------
 drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 19 +++++++++++++++++++
 drivers/net/ethernet/freescale/gianfar.c          |  3 +++
 drivers/net/ethernet/freescale/ucc_geth.c         |  8 +++++++-
 drivers/net/ethernet/marvell/mvneta.c             |  2 ++
 drivers/net/ethernet/xilinx/xilinx_emaclite.c     |  2 ++
 6 files changed, 48 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
index cfa37041ab71..d2103a3199eb 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
@@ -689,16 +689,23 @@ static int xgene_enet_phy_connect(struct net_device *ndev)
 			netdev_dbg(ndev, "No phy-handle found in DT\n");
 			return -ENODEV;
 		}
-		pdata->phy_dev = of_phy_find_device(phy_np);
-	}
 
-	phy_dev = pdata->phy_dev;
+		pdata->phy_dev = of_phy_connect(ndev, phy_np,
+						&xgene_enet_adjust_link,
+						pdata->phy_mode);
+		if (!pdata->phy_dev) {
+			netdev_err(ndev, "Could not connect to PHY\n");
+			return -ENODEV;
+		}
+	} else {
+		phy_dev = pdata->phy_dev;
 
-	if (!phy_dev ||
-	    phy_connect_direct(ndev, phy_dev, &xgene_enet_adjust_link,
-			       pdata->phy_mode)) {
-		netdev_err(ndev, "Could not connect to PHY\n");
-		return  -ENODEV;
+		if (!phy_dev ||
+		    phy_connect_direct(ndev, phy_dev, &xgene_enet_adjust_link,
+				       pdata->phy_mode)) {
+			netdev_err(ndev, "Could not connect to PHY\n");
+			return  -ENODEV;
+		}
 	}
 
 	pdata->phy_speed = SPEED_UNKNOWN;
diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
index 574c49278900..529d212bd071 100644
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
@@ -1000,6 +1000,20 @@ static int bgx_init_phy(struct bgx *bgx)
 	return bgx_init_of_phy(bgx);
 }
 
+/*
+ * This drops the refcount obtained from of_phy_find_device() above.
+ * We do not need to keep the refcount after phy_connect_direct() has
+ * taken its own reference.
+ */
+static void bgx_drop_phy_ref(struct bgx *bgx)
+{
+	unsigned int lmac;
+
+	for (lmac = 0; lmac < bgx->lmac_count; lmac++)
+		if (bgx->lmac[lmac].phydev)
+			put_device(&bgx->lmac[lmac].phydev->dev);
+}
+
 static int bgx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	int err;
@@ -1056,9 +1070,14 @@ static int bgx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
+	if (np)
+		bgx_drop_phy_ref(bgx);
+
 	return 0;
 
 err_enable:
+	if (np)
+		bgx_drop_phy_ref(bgx);
 	bgx_vnic[bgx->bgx_id] = NULL;
 err_release_regions:
 	pci_release_regions(pdev);
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 4b69d061d90f..65a16086faec 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1702,6 +1702,7 @@ static void gfar_configure_serdes(struct net_device *dev)
 	tbiphy = of_phy_find_device(priv->tbi_node);
 	if (!tbiphy) {
 		dev_err(&dev->dev, "error: Could not get TBI device\n");
+		put_device(&tbiphy->dev);
 		return;
 	}
 
@@ -1723,6 +1724,8 @@ static void gfar_configure_serdes(struct net_device *dev)
 	phy_write(tbiphy, MII_BMCR,
 		  BMCR_ANENABLE | BMCR_ANRESTART | BMCR_FULLDPLX |
 		  BMCR_SPEED1000);
+
+	put_device(&tbiphy->dev);
 }
 
 static int __gfar_is_rx_idle(struct gfar_private *priv)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 4dd40e057f40..650f7888e32b 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -1384,6 +1384,8 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
 		value = phy_read(tbiphy, ENET_TBI_MII_CR);
 		value &= ~0x1000;	/* Turn off autonegotiation */
 		phy_write(tbiphy, ENET_TBI_MII_CR, value);
+
+		put_device(&tbiphy->dev);
 	}
 
 	init_check_frame_length_mode(ug_info->lengthCheckRx, &ug_regs->maccfg2);
@@ -1702,8 +1704,10 @@ static void uec_configure_serdes(struct net_device *dev)
 	 * everything for us?  Resetting it takes the link down and requires
 	 * several seconds for it to come back.
 	 */
-	if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
+	if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS) {
+		put_device(&tbiphy->dev);
 		return;
+	}
 
 	/* Single clk mode, mii mode off(for serdes communication) */
 	phy_write(tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
@@ -1711,6 +1715,8 @@ static void uec_configure_serdes(struct net_device *dev)
 	phy_write(tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
 
 	phy_write(tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
+
+	put_device(&tbiphy->dev);
 }
 
 /* Configure the PHY for dev.
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index fe2299ac4f5c..0dce037a2682 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3173,6 +3173,8 @@ static int mvneta_probe(struct platform_device *pdev)
 		struct phy_device *phy = of_phy_find_device(dn);
 
 		mvneta_fixed_link_update(pp, phy);
+
+		put_device(&phy->dev);
 	}
 
 	return 0;
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 6008eee01a33..cf468c87ce57 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -828,6 +828,8 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
 		if (!phydev)
 			dev_info(dev,
 				 "MDIO of the phy is not registered yet\n");
+		else
+			put_device(&phydev->dev);
 		return 0;
 	}
 
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH 0/7] Phy and mdiobus fixes Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-09-18 11:50 +0200
  [PATCH 4/7] of_mdio: fix MDIO phy device refcounting Russell King <rmk+kernel@arm.linux.org.uk> - 2015-09-18 12:00 +0200
  [PATCH 7/7] phy: add phy_device_remove() Russell King <rmk+kernel@arm.linux.org.uk> - 2015-09-18 12:00 +0200
  [PATCH 3/7] phy: add proper phy struct device refcounting Russell King <rmk+kernel@arm.linux.org.uk> - 2015-09-18 12:00 +0200
  [PATCH 5/7] net: fix phy refcounting in a bunch of drivers Russell King <rmk+kernel@arm.linux.org.uk> - 2015-09-18 12:00 +0200
  [PATCH 1/7] phy: fix of_mdio_find_bus() device refcount leak Russell King <rmk+kernel@arm.linux.org.uk> - 2015-09-18 12:00 +0200
    Re: [PATCH 1/7] phy: fix of_mdio_find_bus() device refcount leak David Miller <davem@davemloft.net> - 2015-09-21 21:10 +0200
      Re: [PATCH 1/7] phy: fix of_mdio_find_bus() device refcount leak Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-09-21 21:40 +0200
        Re: [PATCH 1/7] phy: fix of_mdio_find_bus() device refcount leak David Miller <davem@redhat.com> - 2015-09-22 00:10 +0200
  [PATCH 6/7] phy: fixed-phy: properly validate phy in  fixed_phy_update_state() Russell King <rmk+kernel@arm.linux.org.uk> - 2015-09-18 12:00 +0200
  [PATCH 2/7] phy: fix mdiobus module safety Russell King <rmk+kernel@arm.linux.org.uk> - 2015-09-18 12:00 +0200
  Re: [PATCH 0/7] Phy and mdiobus fixes Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-09-18 12:10 +0200
    Re: [PATCH 0/7] Phy and mdiobus fixes Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-09-18 17:30 +0200
  Re: [PATCH 0/7] Phy and mdiobus fixes Florian Fainelli <f.fainelli@gmail.com> - 2015-09-19 23:00 +0200

csiph-web