Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1328552

Re: [PATCH v2 3/5] net: phy: dp83848: Reorganize code for readability and safety

From Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Newsgroups linux.kernel
Subject Re: [PATCH v2 3/5] net: phy: dp83848: Reorganize code for readability and safety
Date 2016-02-07 19:20 +0100
Message-ID <qZC6e-1yh-11@gated-at.bofh.it> (permalink)
References <qZBDb-130-5@gated-at.bofh.it> <qZBDd-130-33@gated-at.bofh.it>
Organization Cogent Embedded

Show all headers | View raw


Hello.

On 02/07/2016 08:47 PM, Andrew F. Davis wrote:

> Reorganize code by moving the desired interrupt mask definition
> out of function. Also rearrange the enable/disable interrupt function
> to prevent accidental over-writing of values in registers.
>
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> ---
>   drivers/net/phy/dp83848.c | 33 ++++++++++++++++++++-------------
>   1 file changed, 20 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
> index d4686d5f..20d3b9d 100644
> --- a/drivers/net/phy/dp83848.c
> +++ b/drivers/net/phy/dp83848.c
[...]
> @@ -46,23 +52,24 @@ static int dp83848_ack_interrupt(struct phy_device *phydev)
>
>   static int dp83848_config_intr(struct phy_device *phydev)
>   {
> -	int err;
> +	int control, ret;
> +
> +	control = phy_read(phydev, DP83848_MICR);
> +	if (control < 0)
> +		return control;
>
>   	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
> -		err = phy_write(phydev, DP83848_MICR,
> -				DP83848_MICR_INT_OE |
> -				DP83848_MICR_INTEN);
> -		if (err < 0)
> -			return err;
> -
> -		return phy_write(phydev, DP83848_MISR,
> -				 DP83848_MISR_ANC_INT_EN |
> -				 DP83848_MISR_DUP_INT_EN |
> -				 DP83848_MISR_SPD_INT_EN |
> -				 DP83848_MISR_LINK_INT_EN);
> +		control |= DP83848_MICR_INT_OE;
> +		control |= DP83848_MICR_INTEN;

    I'd have written this on a single line.

[...]

MBR, Sergei

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread


Thread

[PATCH v2 0/5] net: phy: dp83848: Add support for TI TLK10x Ethernet PHYs "Andrew F. Davis" <afd@ti.com> - 2016-02-07 18:50 +0100
  [PATCH v2 1/5] net: phy: dp83848: Add macro for dp83848 compatible devices "Andrew F. Davis" <afd@ti.com> - 2016-02-07 18:50 +0100
  [PATCH v2 3/5] net: phy: dp83848: Reorganize code for readability and safety "Andrew F. Davis" <afd@ti.com> - 2016-02-07 18:50 +0100
    Re: [PATCH v2 3/5] net: phy: dp83848: Reorganize code for readability  and safety Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> - 2016-02-07 19:20 +0100
  [PATCH v2 5/5] net: phy: dp83848: Add comments for register definitions "Andrew F. Davis" <afd@ti.com> - 2016-02-07 18:50 +0100
  [PATCH v2 4/5] net: phy: dp83848: Add support for TI TLK10x Ethernet PHYs "Andrew F. Davis" <afd@ti.com> - 2016-02-07 18:50 +0100
  [PATCH v2 2/5] net: phy: dp83848: Add PHY ID for TI version of DP83848C "Andrew F. Davis" <afd@ti.com> - 2016-02-07 18:50 +0100
  Re: [PATCH v2 0/5] net: phy: dp83848: Add support for TI TLK10x  Ethernet PHYs Florian Fainelli <f.fainelli@gmail.com> - 2016-02-07 23:40 +0100

csiph-web