Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1321815

[PATCH] clocksource/arm_arch_timer: Enable and verify MMIO access

From Robin Murphy <robin.murphy@arm.com>
Newsgroups linux.kernel
Subject [PATCH] clocksource/arm_arch_timer: Enable and verify MMIO access
Date 2016-01-29 16:00 +0100
Message-ID <qWiGL-4DM-45@gated-at.bofh.it> (permalink)
Organization linux.* mail to news gateway

Show all headers | View raw


So far, we have been blindly assuming that if a memory-mapped timer
frame exists, then we have access to it. Whilst it's the firmware's
job to give us non-secure access to frames in the first place, we
should not rely on it always being generous enough to also configure
CNTACR if it's not even using those frames itself.

Explicitly enable feature-level access per-frame, and verify that the
access we want is really implemented before trying to make use of it.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
---
 drivers/clocksource/arm_arch_timer.c | 39 ++++++++++++++++++++++++++++--------
 1 file changed, 31 insertions(+), 8 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index c64d543..c88485d 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -32,6 +32,14 @@
 #define CNTTIDR		0x08
 #define CNTTIDR_VIRT(n)	(BIT(1) << ((n) * 4))
 
+#define CNTACR(n)	(0x40 + ((n) * 4))
+#define CNTACR_RPCT	BIT(0)
+#define CNTACR_RVCT	BIT(1)
+#define CNTACR_RFRQ	BIT(2)
+#define CNTACR_RVOFF	BIT(3)
+#define CNTACR_RWVT	BIT(4)
+#define CNTACR_RWPT	BIT(5)
+
 #define CNTVCT_LO	0x08
 #define CNTVCT_HI	0x0c
 #define CNTFRQ		0x10
@@ -757,7 +765,6 @@ static void __init arch_timer_mem_init(struct device_node *np)
 	}
 
 	cnttidr = readl_relaxed(cntctlbase + CNTTIDR);
-	iounmap(cntctlbase);
 
 	/*
 	 * Try to find a virtual capable frame. Otherwise fall back to a
@@ -765,20 +772,34 @@ static void __init arch_timer_mem_init(struct device_node *np)
 	 */
 	for_each_available_child_of_node(np, frame) {
 		int n;
+		u32 cntacr;
 
 		if (of_property_read_u32(frame, "frame-number", &n)) {
 			pr_err("arch_timer: Missing frame-number\n");
-			of_node_put(best_frame);
 			of_node_put(frame);
-			return;
+			goto out;
 		}
 
-		if (cnttidr & CNTTIDR_VIRT(n)) {
+		/* Try enabling everything, and see what sticks */
+		cntacr = CNTACR_RFRQ | CNTACR_RWPT | CNTACR_RPCT |
+			 CNTACR_RWVT | CNTACR_RVOFF | CNTACR_RVCT;
+		writel_relaxed(cntacr, cntctlbase + CNTACR(n));
+		cntacr = readl_relaxed(cntctlbase + CNTACR(n));
+
+		if (~cntacr & CNTACR_RFRQ)
+			continue;
+
+		if ((cnttidr & CNTTIDR_VIRT(n)) &&
+		    !(~cntacr & (CNTACR_RWVT | CNTACR_RVCT))) {
 			of_node_put(best_frame);
 			best_frame = frame;
 			arch_timer_mem_use_virtual = true;
 			break;
 		}
+
+		if (~cntacr & (CNTACR_RWPT | CNTACR_RPCT))
+			continue;
+
 		of_node_put(best_frame);
 		best_frame = of_node_get(frame);
 	}
@@ -786,24 +807,26 @@ static void __init arch_timer_mem_init(struct device_node *np)
 	base = arch_counter_base = of_iomap(best_frame, 0);
 	if (!base) {
 		pr_err("arch_timer: Can't map frame's registers\n");
-		of_node_put(best_frame);
-		return;
+		goto out;
 	}
 
 	if (arch_timer_mem_use_virtual)
 		irq = irq_of_parse_and_map(best_frame, 1);
 	else
 		irq = irq_of_parse_and_map(best_frame, 0);
-	of_node_put(best_frame);
+
 	if (!irq) {
 		pr_err("arch_timer: Frame missing %s irq",
 		       arch_timer_mem_use_virtual ? "virt" : "phys");
-		return;
+		goto out;
 	}
 
 	arch_timer_detect_rate(base, np);
 	arch_timer_mem_register(base, irq);
 	arch_timer_common_init();
+out:
+	iounmap(cntctlbase);
+	of_node_put(best_frame);
 }
 CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
 		       arch_timer_mem_init);
-- 
2.7.0.25.gfc10eb5.dirty

Back to linux.kernel | Previous | NextNext in thread | Find similar | Unroll thread


Thread

[PATCH] clocksource/arm_arch_timer: Enable and verify MMIO access Robin Murphy <robin.murphy@arm.com> - 2016-01-29 16:00 +0100
  Re: [PATCH] clocksource/arm_arch_timer: Enable and verify MMIO access Stephen Boyd <sboyd@codeaurora.org> - 2016-01-29 19:40 +0100
    Re: [PATCH] clocksource/arm_arch_timer: Enable and verify MMIO access Robin Murphy <robin.murphy@arm.com> - 2016-01-29 20:50 +0100
      Re: [PATCH] clocksource/arm_arch_timer: Enable and verify MMIO access Stephen Boyd <sboyd@codeaurora.org> - 2016-01-29 21:10 +0100

csiph-web