Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1321541

Re: [PATCH V2 2/4] gpio: gpio-f81504: Add Fintek F81504/508/512 PCIE-to-UART/GPIO GPIOLIB support

From Peter Hung <hpeter@gmail.com>
Newsgroups linux.kernel
Subject Re: [PATCH V2 2/4] gpio: gpio-f81504: Add Fintek F81504/508/512 PCIE-to-UART/GPIO GPIOLIB support
Date 2016-01-29 09:20 +0100
Message-ID <qWcrD-8oa-3@gated-at.bofh.it> (permalink)
References <qVR3Q-1j6-5@gated-at.bofh.it> <qVR3Q-1j6-3@gated-at.bofh.it> <qVTyG-3aT-19@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


Hi Andy,

Andy Shevchenko 於 2016/1/28 下午 08:03 寫道:
> On Thu, 2016-01-28 at 17:20 +0800, Peter Hung wrote:
>> +	/* set output data */
>> +	tmp = inb(priv->gpio_ioaddr + gc->idx);
>
> ioread8 is a bit better since it automatically works with IO space and
> MMIO. But if you are certain you will always have the address in IO
> space, you can disregard this comment.

I had only tested on x86 environment currently. We'll try to get an ARM
platform with PCIE to test it. We'll remain it until getting new board.

>> +static int f81504_gpio_probe(struct platform_device *pdev)
>> +{
>> +	int status;
>> +	struct f81504_gpio_chip *gc;
>> +	void *data = dev_get_platdata(&pdev->dev);
>> +	u8 gpio_idx = *(u8 *)data;
>> +	char *name;
>> +
>> +	if (gpio_idx >= ARRAY_SIZE(fintek_gpio_mapping)) {
>> +		dev_err(&pdev->dev, "%s: gpio_idx:%d out of
>> range.\n",
>> +				__func__, gpio_idx);
>> +		return -ENODEV;
>> +	}
>> +
>> +	gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
>> +	if (!gc)
>> +		return -ENOMEM;
>> +
>>
>
>> +	kfree(data);
>
> What the heck?

Sorry for the big mistake, I'd confused for dev_get_platdata() &
platform_set_drvdata(). I'll rewrite this and check 8250_f81504.c
too.

>> +	status = gpiochip_add(&gc->chip);
>> +	if (status) {
>> +		dev_err(&pdev->dev, "%s: gpiochip_add failed: %d\n",
>> __func__,
>> +				status);
>> +		return -ENOMEM;
>
> You ignored the status.
>
>> +	}
>> +
>> +	return 0;
>
> Perhaps just
> return gpiochip_add(); ?

Just return gpiochip_add() seems good.

Thanks your advices
-- 
With Best Regards,
Peter Hung

Back to linux.kernel | Previous | NextPrevious in thread | Find similar | Unroll thread


Thread

[PATCH V2 2/4] gpio: gpio-f81504: Add Fintek F81504/508/512 PCIE-to-UART/GPIO GPIOLIB support Peter Hung <hpeter@gmail.com> - 2016-01-28 10:30 +0100
  [PATCH] gpio: gpio-f81504: fix platform_no_drv_owner.cocci warnings kbuild test robot <lkp@intel.com> - 2016-01-28 11:00 +0100
  Re: [PATCH V2 2/4] gpio: gpio-f81504: Add Fintek F81504/508/512  PCIE-to-UART/GPIO GPIOLIB support Andy Shevchenko <andriy.shevchenko@linux.intel.com> - 2016-01-28 13:10 +0100
    Re: [PATCH V2 2/4] gpio: gpio-f81504: Add Fintek F81504/508/512  PCIE-to-UART/GPIO GPIOLIB support Peter Hung <hpeter@gmail.com> - 2016-01-29 09:20 +0100

csiph-web