Re: Nokia N900: musb is in wrong state after boot

From	Pali Rohár <pali.rohar@gmail.com>
Newsgroups	linux.kernel
Subject	Re: Nokia N900: musb is in wrong state after boot
Date	2016-01-21 09:50 +0100
Message-ID	<qTj6i-2ML-5@gated-at.bofh.it> (permalink)
References	<qP3t7-7kY-9@gated-at.bofh.it> <qSLei-4ue-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On Tuesday 19 January 2016 12:33:15 Tony Lindgren wrote:
> Hi,
> 
> * Pali Rohár <pali.rohar@gmail.com> [160109 07:16]:
> > Hello,
> > 
> > when I boot 4.4.0-rc7+ kernel compiled with g_nokia into zImage on Nokia 
> > N900 into userspace then usb gadget (g_nokia) does not work. Notebook, 
> > connected on other side does not see any usb device... Connecting and 
> > disconnecting cable does not change anything, still not work.
> > 
> > But if I run this command
> > $ echo peripheral > /sys/bus/platform/devices/musb-hdrc.0.auto/mode 
> 
> 
> > then gadget starts working. Other side see usb device and can use it. 
> > Also connecting and disconnecting usb cable working fine. After 
> > connecting it again, usb device OK.
> 
> N900 had the PHY interrupt wired to the bq chip instead of twl4030, right?

I do not know now. I tried to find it in N900 schemantics, but do not
see it.

CCing Joerg, do you know?

> You can fix this issue similar to phy-twl4030-usb.c. In function
> twl4030_phy_power_on() we call schedule_delayed_work() that checks
> the state of the ID pin on boot up.

I looked at that code, but do not see what and how can be fixed :-(

> I think that's only needed for the i2c based PHY's with MUSB, with
> the others the USB driver has a better idea of the current state.
> 
> Regards,
> 
> Tony

-- 
Pali Rohár
pali.rohar@gmail.com

Thread

Re: Nokia N900: musb is in wrong state after boot Tony Lindgren <tony@atomide.com> - 2016-01-19 21:40 +0100
  Re: Nokia N900: musb is in wrong state after boot Pali Rohár <pali.rohar@gmail.com> - 2016-01-21 09:50 +0100
    Re: Nokia N900: musb is in wrong state after boot Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> - 2016-01-21 11:00 +0100
      Re: Nokia N900: musb is in wrong state after boot Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> - 2016-01-21 11:30 +0100
      Re: Nokia N900: musb is in wrong state after boot Pali Rohár <pali.rohar@gmail.com> - 2016-01-21 11:30 +0100
    Re: Nokia N900: musb is in wrong state after boot joerg Reisenweber <joerg@openmoko.org> - 2016-01-21 12:00 +0100
      Re: Nokia N900: musb is in wrong state after boot Tony Lindgren <tony@atomide.com> - 2016-01-21 18:50 +0100
        Re: Nokia N900: musb is in wrong state after boot joerg Reisenweber <joerg@openmoko.org> - 2016-01-21 19:50 +0100
          Re: Nokia N900: musb is in wrong state after boot Tony Lindgren <tony@atomide.com> - 2016-01-21 20:30 +0100
            Re: Nokia N900: musb is in wrong state after boot joerg Reisenweber <joerg@openmoko.org> - 2016-01-21 20:40 +0100
              Re: Nokia N900: musb is in wrong state after boot Tony Lindgren <tony@atomide.com> - 2016-01-21 21:40 +0100
                Re: Nokia N900: musb is in wrong state after boot Pali Rohár <pali.rohar@gmail.com> - 2016-01-26 15:40 +0100
                Re: Nokia N900: musb is in wrong state after boot Tony Lindgren <tony@atomide.com> - 2016-01-26 18:30 +0100
            Re: Nokia N900: musb is in wrong state after boot Pali Rohár <pali.rohar@gmail.com> - 2016-01-23 14:00 +0100

csiph-web